Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for RHD)
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0074645 FRONT SEAT INNER BELT ASSEMBLY(for RHD) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for RHD)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver)

a.
B271232
0.208,0.167 0.573,0.448 0.365,0.281 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Driver))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Driver seat belt unfastened Below 1 Ω
2 - 3 Driver seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly (for driver).


Hide 73240 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger)

a.
B271152
1.521,0.406 1.906,0.656 0.385,0.25 1.542,2.823 1.927,3.073 0.385,0.25 0.177,0.104 0.531,0.385 0.354,0.281 10 false *a 1.625,0.448 2,0.677 0.375,0.229 10 false N2 1.677,2.865 2.104,3.104 0.427,0.24 10 false B
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Front Passenger))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N2-3 - B-1 Always Below 1 Ω
N2-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
N2-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly (for front passenger).