Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0074648 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73360C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B279526C13
2.229,0.313 2.927,0.604 2.927,0.604 2.313,1.01 false 0.552,0.656 0.771,0.885 0.219,0.229 10 false *a 2.969,0.521 3.26,0.729 0.292,0.208 10 false *1 1.344,1.99 1.583,2.177 0.24,0.188 10 false *b 0.896,1.365 1.135,1.542 0.24,0.177 10 false *c
*1 Retractor
*a Unlocked
*b Locked
*c 45°


Before installing the rear no. 1 seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear no. 1 seat outer belt assembly.