Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0074648 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the rear seat outer belt assembly.


PROCEDURE

Hide 73360C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)

a.

Visually check for defects with the rear no. 1 seat outer belt assembly installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the rear no. 1 seat outer belt assembly

·

Small cracks on the rear no. 1 seat outer belt assembly

·

Significant discoloration on the rear no. 1 seat outer belt assembly


OK:

No defects are found.


HINT:

If any of the defects is found, replace the rear no. 1 seat outer belt assembly with a new one.




Hide 73360C 2.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)

a.

Visually check for defects with the rear no. 1 seat outer belt assembly removed from the vehicle.

i.

The defects are as follows:

·

Cuts on the rear no. 1 seat outer belt assembly

·

Small cracks on the rear no. 1 seat outer belt assembly

·

Significant discoloration on the rear no. 1 seat outer belt assembly

·

Cracks or other damage to the connector


OK:

No defects are found.


HINT:

If any of the defects is found, replace the rear no. 1 seat outer belt assembly with a new one.