Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT
RM2030EQ _58 Vehicle Interior _014672 HEATING / AIR CONDITIONING _0074654 AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  AIR CONDITIONING UNIT  DISASSEMBLY  


PROCEDURE

Hide 87201 1.REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY

a.
E227191

Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.


Hide 55840C 2.REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY

a.
E227193

Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.


Hide 88669A 3.REMOVE COOLER THERMISTOR HOSE

a.
E234890

Disengage the clamp and remove the cooler thermistor hose.


Hide 88897P 4.REMOVE ASPIRATOR

a.
E227232

Disengage the 2 claws and remove the aspirator.


Hide 82210K 5.REMOVE AIR CONDITIONING HARNESS ASSEMBLY

a.
E227195

Remove the heater packing as shown in the illustration.


b.
E228262

Disconnect each connector.


c.

Disengage each clamp and remove the air conditioning harness assembly.


Hide 87201F 6.REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY (for RHD)

a.
E248529

Disengage the 2 claws and guide, and remove the No. 3 air duct sub-assembly as shown in the illustration.


Hide 88515 7.REMOVE COOLER EXPANSION VALVE

a.
E227206

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.


Hide 8.REMOVE BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY

Hide 88501 10.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.
E227204

Remove the No. 1 cooler evaporator sub-assembly from the blower assembly as shown in the illustration.


b.
C129881

Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.


Hide 88899L 11.REMOVE COOLING UNIT PARTS

a.
E182729

Disengage the 4 claws to remove the cooling unit parts.


Hide 87050D 12.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

a.
E174812

Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.


Hide 87107A 13.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
E227200

Disengage the 3 claws and remove the heater clamp.


b.
E227201

Remove the screw and clamp.


c.
E227202

Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly as shown in the illustration.

NOTICE:

Prepare a drain pan or cloth in case the coolant leaks.



Hide 87050C 14.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

a.
E227877

Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.