Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR
RM2030EQ _58 Vehicle Interior _014672 HEATING / AIR CONDITIONING _0074666 COMPRESSOR A

HEATING / AIR CONDITIONING  COMPRESSOR  DISASSEMBLY  


PROCEDURE

Hide 88688N 1.REMOVE COOLER BRACKET

a.
E231354

Disconnect the connector.


b.

Disengage the clamp.


c.

Remove the screw and cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E156529
0.479,1.51 1.01,1.51 false 0.188,1.417 0.719,1.698 0.531,0.281 10 false SST

Clamp the cooler compressor in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
07112-76060  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers that is used for adjusting clutch clearance.



d.
I104018

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disengage the clamp.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.