Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM2030EQ _59 Vehicle Exterior _014675 WINDOW / GLASS _0074682 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 64811 1.REPAIR REAR WINDOW DEFOGGER WIRE (BACK WINDOW GLASS)

B106758
1.052,0.573 0.5,1.083 0.5,1.083 1.104,1.01 false 1.708,0.979 1.708,1.375 false 2.833,0.885 2.833,1.115 false 1.646,1.406 1.854,1.656 0.208,0.25 10 false *a 0.323,1 0.51,1.188 0.188,0.188 10 false *1 2.771,1.146 2.99,1.396 0.219,0.25 10 false *2
*1 Masking Tape
*2 Broken Wire
*a Repair Point


a.

Clean the broken wire tips with a grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.
B106759

Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).


d.

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not use the rear window defogger for at least 24 hours after performing the repair.