Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM2030EQ _59 Vehicle Exterior _014677 DOOR / HATCH _0074689 HOOD SUPPORT N

DOOR / HATCH  HOOD SUPPORT  DISPOSAL  


PROCEDURE

Hide 53450A 1.DISPOSE OF HOOD SUPPORT ASSEMBLY

a.

Horizontally hold the hood support in a vise with the piston-rod pulled out.


b.
B127037
1.896,1.375 2.271,1.667 0.375,0.292 10 false A 2.948,1.365 3.292,1.635 0.344,0.271 10 false B

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.

Area Measurement
A-B 100 mm (3.94 in.)

NOTICE:

Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.