Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE DOOR HINGE TORSION BAR
RM2030EQ _59 Vehicle Exterior _014677 DOOR / HATCH _0074694 LUGGAGE DOOR HINGE TORSION BAR A

DOOR / HATCH  LUGGAGE DOOR HINGE TORSION BAR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


PROCEDURE

Hide 64711 1.REMOVE LUGGAGE COMPARTMENT FLOOR MAT

a.

Remove the luggage compartment floor mat.


Hide 58387 2.REMOVE REAR FLOOR FINISH PLATE

a.
B308604

Remove the 5 clips.


b.
B308605

Disengage the 4 clips and remove the rear floor finish plate.


Hide 64725D 3.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

a.
B293412
2.104,2.333 2.677,2.646 false 2.729,2.594 3.135,2.875 0.406,0.281 10 false *1
*1 Pin


Push the 2 pins and remove the 2 No. 1 luggage compartment trim hooks.


Hide 64722 4.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH

a.
B293413

Remove the 3 clips.


b.

Disengage the fastener and remove the luggage compartment inner trim cover LH.


Hide 64721 5.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH

a.
B293414

Remove the 3 clips.


b.

Disengage the fastener and remove the luggage compartment inner trim cover RH.


Hide 64572 6.REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

a.
B287071

Disengage the 4 claws and remove the luggage compartment door hinge cover LH.


Hide 64571B 7.REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 64532 8.REMOVE LUGGAGE DOOR HINGE TORSION BAR LH

a.
B279214E01
2.74,1.688 3.063,1.938 0.323,0.25 10 false (1) 2.042,1.604 2.344,1.844 0.302,0.24 10 false (2)

Disengage the hook in the order indicated in the illustration and disconnect the rear seatback lock assembly LH (rear seat lock control cable LH).

HINT:

Use the same procedure as for the LH side and RH side.



b.
B293415
0.927,0.74 0.406,0.219 false 0.24,0.104 0.677,0.375 0.438,0.271 10 false *1
*1 Protective Tape


Put protective tape around the luggage door hinge.


c.
B280573
0.521,0.458 0.646,0.458 0.646,0.458 0.917,1.063 false 0.917,4.198 1.073,3.823 false 0.271,1.594 0.656,1.958 0.385,0.365 10 false (1) 1.969,1.198 2.344,1.49 0.375,0.292 10 false (2) 0.635,2.823 0.927,3.135 0.292,0.313 10 false (3) 0.198,0.375 0.646,0.635 0.448,0.26 10 false SST 0.76,4.24 1.198,4.521 0.438,0.281 10 false SST

Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.

SST
09804-24010  


d.
B280571

Disengage the 2 claws as shown in the illustration.


e.
B280575

Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.


f.
B280577

Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.


Hide 64531 9.REMOVE LUGGAGE DOOR HINGE TORSION BAR RH

a.
B293416
2.427,0.635 2.813,0.156 false 2.844,0.031 3.26,0.344 0.417,0.313 10 false *1
*1 Protective Tape


Put protective tape around the luggage door hinge.


b.
B280579
2.844,0.406 2.688,0.406 2.688,0.406 2.417,1.063 false 2.115,4.063 2.25,3.802 false 2.542,1.823 2.875,2.104 0.333,0.281 10 false (1) 1.167,1.094 1.458,1.365 0.292,0.271 10 false (2) 2.531,2.781 2.885,3.073 0.354,0.292 10 false (3) 2.875,0.323 3.229,0.583 0.354,0.26 10 false SST 1.99,4.094 2.406,4.365 0.417,0.271 10 false SST

Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.

SST
09804-24010  


c.
B280581

Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.


d.
B280583

Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.


Hide 64127B 10.REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

a.
B280585

Remove the luggage compartment door torsion bar support as shown in the illustration.

NOTICE:

Make sure to replace the luggage compartment door torsion bar support with a new one.