Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.
85110
1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)
| *a | Component without harness connected
(Windshield Wiper Motor Assembly) |
Check low speed operation.
Connect a battery positive (+) lead to terminal A29-5 (+1) and a negative (-) lead to terminal A29-4 (E) and check that the motor operates at low speed.
Motor operates at low speed.
Check high speed operation.
Connect a battery positive (+) lead to terminal A29-3 (+2) and a negative (-) lead to terminal A29-4 (E) and check that the motor operates at high speed.
Motor operates at high speed.
If the result is not as specified, replace the windshield wiper motor assembly.
85110
2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)
| *a | Component without harness connected
(Windshield Wiper Motor Assembly) |
Check low speed operation.
Connect a battery positive (+) lead to terminal A29-1 (+1) and a negative (-) lead to terminal A29-5 (E), and check that the motor operates at low speed.
Motor operates at low speed.
Check high speed operation.
Connect a battery positive (+) lead to terminal A29-4 (+2) and a negative (-) lead to terminal A29-5 (E), and check that the motor operates at high speed.
Motor operates at high speed.
If the result is not as specified, replace the windshield wiper motor assembly.