Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER
RM2030EQ _59 Vehicle Exterior _014679 WIPER / WASHER _0074709 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  REPLACEMENT  


PROCEDURE

Hide 85222A 1.REMOVE FRONT WIPER BLADE

a.
E226640
2.104,0.833 2.49,0.615 false 2.469,0.469 2.833,0.74 0.365,0.271 10 *a
*a Holder


Pull up the holder of the front wiper blade.


b.

Remove the front wiper blade from the front wiper arm as shown in the illustration.

NOTICE:

Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.



Hide 85214B 2.REMOVE WIPER RUBBER

a.
E226641

Remove the wiper rubber with the front wiper rubber backing plates from the front wiper blade.


b.
E226642

Remove the 2 front wiper rubber backing plates from the wiper rubber.


Hide 85214B 3.INSTALL WIPER RUBBER

a.
E226643

Install the 2 front wiper rubber backing plates to the wiper rubber.

NOTICE:
·

Align the protrusions on the wiper rubber and the notches of the backing plates.

·

Align the curves of the backing plates and the glass.




b.
E226644
2.344,0.948 2.833,0.948 false 2.865,0.833 3.115,1.104 0.25,0.271 10 false *a
*a Rear of the wiper blade


Install the wiper rubber to the front wiper blade as shown in the illustration.

NOTICE:

Push the wiper rubber into the front wiper blade strongly to engage them securely.



Hide 85222A 4.INSTALL FRONT WIPER BLADE

a.
E226645
2.156,0.875 2.51,0.625 false 2.51,0.458 2.802,0.708 0.292,0.25 10 *a
*a Holder


Install the front wiper blade as shown in the illustration.


b.

Install the holder of the front wiper blade.