Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE
RM2030EQ _59 Vehicle Exterior _014679 WIPER / WASHER _0074712 WASHER NOZZLE A

WIPER / WASHER  WASHER NOZZLE  REMOVAL  


PROCEDURE

Hide 85035 1.REMOVE WASHER NOZZLE SUB-ASSEMBLY

a.
E226459
0.844,2.063 0.51,2.167 false 0.292,2.094 0.646,2.438 0.354,0.344 10 false *1 2.01,1.302 2.417,1.604 0.406,0.302 10 false (1) 2.792,0.875 3.115,1.146 0.323,0.271 10 false (2)
*1 Protective Tape


Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

NOTICE:

Be careful not to damage the windshield.


HINT:

Tape the screwdriver tip before use.



b.
E226460

Remove the washer nozzle sub-assembly from the washer hose.

NOTICE:

Washer nozzles cannot be reused.


HINT:

Use the same procedure for the RH side and LH side.