Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR › 2012.02–2015.04
RM2030EQ _59 Vehicle Exterior _014679 WIPER / WASHER _0074713 HEADLIGHT CLEANER ACTUATOR A

WIPER / WASHER  HEADLIGHT CLEANER ACTUATOR  INSTALLATION  


PROCEDURE

Hide 85208A 1.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY

a.

Engage the guide to the front bumper assembly, then push the tab (A) and engage the claw as shown in the illustration.

E246071E01
3.104,0.979 3.458,1.24 0.354,0.26 10 false (A)


b.

Install the bolt.

Torque:
1.1 N*m (11 kgf*cm, 10 in.*lbf)


c.

Connect the headlight cleaner hose and engage the clip.

HINT:

Use the same procedure for the RH side and LH side.



Hide 2.INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY

Hide 3.INSTALL FRONT BUMPER ASSEMBLY