Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR › 2012.02–2015.04
RM2030EQ _59 Vehicle Exterior _014679 WIPER / WASHER _0074716 HEADLIGHT CLEANER MOTOR G

WIPER / WASHER  HEADLIGHT CLEANER MOTOR  INSPECTION  


PROCEDURE

Hide 85280A 1.INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

HINT:

The following check should be performed with the headlight cleaner motor and pump assembly installed to the washer jar.


a.

Fill the washer jar with washer fluid.


b.
E190232C09
1.51,0.125 1.958,0.385 0.448,0.26 0.115,0.063 0.458,0.323 0.344,0.26 10 *a 1.615,0.156 2.021,0.417 0.406,0.26 10 A51
*a Component without harness connected
(Headlight Cleaner Motor and Pump Assembly)


Connect a battery positive (+) lead to terminal A51-2 of the headlight cleaner motor and pump assembly, and a battery negative (-) lead to terminal A51-1.


c.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid is pumped from the washer jar.


If the result is not as specified, replace the headlight cleaner motor and pump assembly.