Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY › 2012.02–2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074720 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81110B 1.REMOVE NO. 1 HEADLIGHT BULB

a.
E226722

Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:

Do not touch the bulb glass.



Hide 81110D 2.REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight)

a.
E226734

Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:

Do not touch the bulb glass.



Hide 81108 3.REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)

a.
E226724

Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.

NOTICE:
·

Do not apply excessive force using a tool.

·

Do not damage the O-ring or allow it to become contaminated with foreign matter. If the O-ring is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly.




b.
E226726

Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:

Do not pull the headlight light control ECU sub-assembly with the socket connected.



Hide 81110L 4.REMOVE DISCHARGE HEADLIGHT BULB (for HID Headlight)

a.
E226728
1.458,0.031 1.667,0.208 0.208,0.177 10 true 1 1.885,0.073 2.094,0.25 0.208,0.177 10 true 1 0.958,1.104 1.167,1.281 0.208,0.177 10 true 2

Release the set spring as shown in the illustration and remove the discharge headlight bulb.

NOTICE:

Do not touch the bulb glass.



Hide 81144C 5.REMOVE HEADLIGHT SOCKET COVER

a.

for Halogen Headlight:

i.

Remove the 2 headlight socket covers from the headlight unit.



b.

for HID Headlight:

i.

Remove the headlight socket cover from the headlight unit.



Hide 81730B 6.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E226730

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the front turn signal light bulb from the front turn signal light socket.


Hide 81610F 7.REMOVE CLEARANCE LIGHT BULB (for LH Side)

a.
E226732

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the clearance light bulb from the clearance light socket.


Hide 81610F 8.REMOVE CLEARANCE LIGHT BULB (for RH Side)

a.

for Long Type:

HINT:

Use the same procedure as for the LH side.



b.

for Short Type:

i.
E283675

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


ii.

Remove the clearance light bulb from the clearance light socket.



Hide 9.REMOVE GROMMET

a.
E226742

Using needle-nosed pliers, remove the grommet.