Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074724 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 52562F 1.INSTALL REAR BUMPER UPPER SIDE RETAINER

a.
E245844

Engage the claw to install the rear bumper upper side retainer as shown in the illustration.


Hide 81550H 2.INSTALL TAIL AND STOP LIGHT BULB

a.

Install the tail and stop light bulb to the tail and stop light socket.


b.
E245845

Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear turn signal light socket.


b.
E245846

Turn the rear turn signal light socket with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81562A 4.INSTALL REAR COMBINATION LIGHT GASKET

a.
E245839

Install a new rear combination light gasket.