Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › 2012.02–2016.05
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074725 REAR LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81670B 1.REMOVE BACK-UP LIGHT BULB

a.
E245849

Turn the back-up light socket with the back-up light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the back-up light bulb from the back-up light socket.


Hide 81550F 2.REMOVE TAIL LIGHT BULB

a.
E245851

Turn the tail light socket with the tail light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the tail light bulb from the rear light socket.


Hide 81594A 3.REMOVE REAR LIGHT GASKET

a.
E245853

Remove the rear light gasket.

NOTICE:
·

Be sure to remove all the traces of the old gasket from the body.

·

Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.