Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074726 LICENSE PLATE LIGHT ASSEMBLY G

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81270 1.INSPECT LICENSE PLATE LIGHT ASSEMBLY

a.
E220266
0.181,0.169 0.334,0.315 0.152,0.147 10 *a
*a Component without harness connected
(License Plate Light Assembly)


Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.


b.

Check that the license plate light comes on.

OK:

The light comes on.


If the result is not as specified, replace the bulb or license plate light socket and wire.