Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY › 2012.02–2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074727 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81006 1.INSPECT CENTER STOP LIGHT SET (w/o Rear Spoiler)

a.

w/ Rear Sunshade

i.
E142609C11
0.179,0.166 0.333,0.315 0.154,0.149 10 *a
*a Component without harness connected
(Center Stop Light Set)


Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.


ii.

Check that the center stop light comes on.

OK:

The light comes on.


If the result is not as specified, replace the center stop light set.



b.

w/o Rear Sunshade

i.
E142609C12
0.179,0.166 0.333,0.315 0.154,0.149 10 *a
*a Component without harness connected
(Center Stop Light Set)


Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.


ii.

Check that the center stop light comes on.

OK:

The light comes on.


If the result is not as specified, replace the center stop light set.



Hide 81570 2.INSPECT CENTER STOP LIGHT ASSEMBLY (w/ Rear Spoiler)

a.
B113722
0.234,0.073 0.463,0.263 0.230,0.190 10 *a
*a Component without harness connected
(Center Stop Light Assembly)


Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.


b.

Check that the center stop light comes on.

OK:

The light comes on.


If the result is not as specified, replace the center stop light assembly.