1.INSTALL REAR BUMPER ASSEMBLY
w/ TOYOTA Parking Assist-sensor System:
Connect the connector.
Engage the 4 clamps.
Engage the 6 claws.
Engage the 7 claws and install the rear bumper assembly as shown in the illustration.
Use the same procedure for the RH side and LH side.
Install the 2 screws.
Use the same procedure for the RH side and LH side.
Install the 6 screws.
Install the 4 clips.
52164A
2.INSTALL REAR BUMPER PLATE LH
| *1 | Hook |
Engage the hook.
Engage the 2 claws to install the rear bumper plate LH.
52163A
3.INSTALL REAR BUMPER PLATE RH
Use the same procedure as for the LH side.