Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER › 2012.02–2015.04
RM2030EQ _59 Vehicle Exterior _014682 EXTERIOR PANELS / TRIM _0074746 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  INSTALLATION  


PROCEDURE

Hide 76085 1.INSTALL REAR SPOILER SUB-ASSEMBLY

HINT:

When installing the rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.


Heating temperature:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Spoiler 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body and rear spoiler sub-assembly excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the 2 No. 1 rear spoiler protectors from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Clean the rear spoiler sub-assembly. (If reusing the rear spoiler sub-assembly)

i.

Using a heat light, heat the rear spoiler sub-assembly.


ii.

Remove the rear spoiler protector from the rear spoiler sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.


iv.

Apply new rear spoiler protector to the rear spoiler sub-assembly.



c.

Install the rear spoiler sub-assembly.

i.

Using a heat light, heat the vehicle body and rear spoiler sub-assembly.


ii.

Remove the 2 release papers from the 2 No. 1 rear spoiler protectors.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Engage the 2 clips and install the rear spoiler sub-assembly.

B308034C01
6.689,1.945 6.868,2.116 0.179,0.171 10 *1 6.677,2.015 6.448,1.854 false
*1 Clip - -



iv.

Install the 2 nuts.


v.

Connect the connector.



Hide 81570 2.INSTALL CENTER STOP LIGHT ASSEMBLY

Hide 64719A 3.INSTALL LUGGAGE COMPARTMENT DOOR COVER