When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, name plates or emblem excessively.
75431
1.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)
Using a heat light, heat the luggage compartment door emblem.
Remove the double-sided tape from the luggage compartment door emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the luggage compartment door emblem.
Install the luggage compartment door emblem.
Using a heat light, heat the vehicle body and luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.
75442
2.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the No. 2 luggage compartment door name plate. (If reusing the No. 2 luggage compartment door name plate)
Using a heat light, heat the No. 2 luggage compartment door name plate.
Remove the double-sided tape from the No. 2 luggage compartment door name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the No. 2 luggage compartment door name plate.
Install the No. 2 luggage compartment door name plate.
Using a heat light, heat the vehicle body and No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate.
| *1 | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 6.5 mm (0.256 in.) | B | 192.1 mm (7.56 in.) |
| C | 10.6 mm (0.417 in.) | - | - |
75441A
3.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the No. 1 luggage compartment door name plate. (If reusing the No. 1 luggage compartment door name plate)
Using a heat light, heat the No. 1 luggage compartment door name plate.
Remove the double-sided tape from the No. 1 luggage compartment door name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the No. 1 luggage compartment door name plate.
Install the No. 1 luggage compartment door name plate.
Using a heat light, heat the vehicle body and No. 1 luggage compartment door name plate.
Remove the release paper from the No. 1 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 luggage compartment door name plate.
| *1 | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 6.5 mm (0.256 in.) | B | 126.1 mm (4.96 in.) |
| C | 11.1 mm (0.437 in.) | D | 11.1 mm (0.437 in.) |
| E | 177.4 mm (6.98 in.) | F | 11.1 mm (0.437 in.) |
| G | 11.1 mm (0.437 in.) | H | 171 mm (6.73 in.) |
| I | 11.1 mm (0.437 in.) | J | 11.1 mm (0.437 in.) |
| K | 170.5 mm (6.71 in.) | L | 11.1 mm (0.437 in.) |
| M | 11.1 mm (0.437 in.) | N | 194.6 mm (7.66 in.) |
| O | 11.1 mm (0.437 in.) | P | 5.4 mm (0.213 in.) |
| Q | 185 mm (7.28 in.) | R | 5.4 mm (0.213 in.) |
| S | 10.6 mm (0.417 in.) | T | 83 mm (3.27 in.) |
| U | 10.3 mm (0.406 in.) | - | - |
75443A
4.INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the No. 3 luggage compartment door plate. (If reusing the No. 3 luggage compartment door plate)
Using a heat light, heat the No. 3 luggage compartment door plate.
Remove the double-sided tape from the No. 3 luggage compartment door plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the No. 3 luggage compartment door plate.
Install the No. 3 luggage compartment door plate.
Using a heat light, heat the vehicle body and No. 3 luggage compartment door plate.
Remove the release paper from the No. 3 luggage compartment door plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 3 luggage compartment door plate.
| *1 | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 69.8 mm (2.75 in.) | B | 172.7 mm (6.80 in.) |
| C | 66.8 mm (2.63 in.) | D | 69.8 mm (2.75 in.) |
| E | 169.9 mm (6.69 in.) | F | 66.8 mm (2.63 in.) |
| G | 83.3 mm (3.28 in.) | H | 144.7 mm (5.70 in.) |
| I | 82.8 mm (3.26 in.) | - | - |
75374
5.INSTALL SIDE PANEL EMBLEM
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the side panel emblem. (If reusing the side panel emblem)
Using a heat light, heat the side panel emblem.
Remove the double-sided tape from the side panel emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the side panel emblem.
Install the side panel emblem.
Using a heat light, heat the vehicle body and side panel emblem.
Remove the release paper from the side panel emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the side panel emblem.
| *A | for LH Side | *B | for RH Side |
| *1 | Profile of Front Fender Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 201 mm (7.91 in.) | B | 220.1 mm (8.67 in.) |
| C | 191.8 mm (7.55 in.) | D | 189.9 mm (7.48 in.) |
| E | 219.5 mm (8.64 in.) | F | 202.1 mm (7.96 in.) |