When removing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, name plates or emblem excessively.
75431
1.REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM
| *1 | Protective Tape |
Put protective tape around the luggage compartment door emblem.
Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the luggage compartment door emblem.
If reusing the luggage compartment door emblem, take care not to damage the luggage compartment door emblem.
Be careful not to damage the vehicle body.
75442
2.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *1 | Wooden Block |
| *2 | Piano Wire |
| *3 | Protective Tape |
Put protective tape around the No. 2 luggage compartment door name plate.
Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire to separate the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.
If reusing the No. 2 luggage compartment door name plate, take care not to damage the No. 2 luggage compartment door name plate.
Be careful not to damage the vehicle body.
Remove the No. 2 luggage compartment door name plate.
75441A
3.REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *1 | Wooden Block |
| *2 | Piano Wire |
| *3 | Protective Tape |
Put protective tape around the No. 1 luggage compartment door name plate.
Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire to separate the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.
If reusing the No. 1 luggage compartment door name plate, take care not to damage the No. 1 luggage compartment door name plate.
Be careful not to damage the vehicle body.
Remove the No. 1 luggage compartment door name plate.
75443A
4.REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
| *1 | Wooden Block |
| *2 | Piano Wire |
| *3 | Protective Tape |
Put protective tape around the No. 3 luggage compartment door plate.
Insert a piano wire between the vehicle body and No. 3 luggage compartment door plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire to separate the double-sided tape that holds the No. 3 luggage compartment door plate to the vehicle body.
If reusing the No. 3 luggage compartment door plate, take care not to damage the No. 3 luggage compartment door plate.
Be careful not to damage the vehicle body.
Remove the No. 3 luggage compartment door plate.
75374
5.REMOVE SIDE PANEL EMBLEM
| *1 | Wooden Block |
| *2 | Piano Wire |
| *3 | Protective Tape |
Put protective tape around the side panel emblem.
Insert a piano wire between the vehicle body and side panel emblem.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire to separate the double-sided tape that holds the side panel emblem to the vehicle body.
If reusing the side panel emblem, take care not to damage the side panel emblem.
Be careful not to damage the vehicle body.
Remove the side panel emblem.
Use the same procedure for the RH side and LH side.