Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM
RM2030EQ _59 Vehicle Exterior _014676 SLIDING ROOF / CONVERTIBLE _0074687 SLIDING ROOF SYSTEM W

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  CUSTOMIZE PARAMETERS  


1. CUSTOMIZE SLIDING ROOF SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function(s) can be customized.

·

Be sure to make notes of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Main Body / Utility / Customize / Power Window.


v.

Select the setting by referring to the table below.

Power Window
Tester Display Description Default Setting ECU
Door Key P/W Up This function is used to close the power windows and sliding roof by operating the mechanical key.*1 OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Door Key P/W Down This function is used to open the power windows and sliding roof by operating the mechanical key.*1 OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
P/W Down W/ Transmit This function is used to open the power windows and sliding roof using the wireless key transmitter.*1 OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 4

*1: for RHD



vi.

Enter the following menus: Body / Sliding Roof / Utility / Customize / Slide Roof.


vii.

Select the setting by referring to the table below.

Slide Roof
Tester Display Description Default Setting ECU
Door Key Related Operation Function to select tilt up or slide open of sliding roof key-linked function.*1 Slide 0:Slide,1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
Wireless Key Related Operation Function to select tilt up or slide open of sliding roof wireless transmitter-linked function.*1 Slide 0:Slide,1:Tilt Sliding roof ECU (Sliding roof drive gear sub-assembly)
Front SW Auto Operation This function is used to enable or disable the auto operation. ON 0:OFF,1:ON Sliding roof ECU (Sliding roof drive gear sub-assembly)
50006 10

*1: for RHD



viii.

Enter the following menus: Body / Main Body / Utility / Customize / Security.


ix.

Select the setting by referring to the table below.

Security
Tester Display Description Default Setting ECU
Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 3