CUSTOMIZE REAR SUNSHADE SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Others.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Rear Shade Delay Time | Function to change the time lag of the shift-linked operation | 0.7 s | 00:0.7 s,10:0.9 s,01:1.2 s,11:0.0 s | Main body ECU (Multiplex network body ECU) |
| R-pos to Rear Sun Shade COM | Function to lower the rear sunshade when the shift lever is moved to R with the rear sunshade raised | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |