Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.02–2015.04
RM2030EQ _56 Audio / Visual / Telematics _014658 AUDIO / VIDEO _0076716 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted  


CAUTION / NOTICE / HINT

HINT:

If an outlet of the air conditioning system is facing the microphone, noise may be recorded and the other caller may not be able to hear your voice properly.


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller can hear your voice properly.

OK:

Your voice can be heard properly.


HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



Result:
Proceed to
OK
NG



OK

2.CHECK SETTINGS

NG

REPLACE CELLULAR PHONE

2.CHECK SETTINGS
a.
E225861C03
0.094,0.083 0.531,0.427 0.438,0.344 10 false *a
*a Example


Display the "Call" screen.


b.

Check that the "Mute" switch is not set to on.

OK:

"Mute" switch is not set to on.



Result:
Proceed to
OK
NG



OK

3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

NG

TURN "Mute" SWITCH OFF

3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E225853

Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>OPERATION CHECK


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

OK:

Check result is normal.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG