The power steering ECU assembly receives signals from the ECM and brake actuator assembly via the CAN communication system.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition |
|---|---|---|---|---|---|
| U0100/41 | Lost Communication with ECM/PCM "A" | Lost communication with ECM | ·
CAN communication system ·
ECM |
EPS Warning Light: When an error occurs during steering assist, the warning light does not illuminate. For errors that occur before assist (at the time of the decision to start assist), the warning light illuminates. | After normal confirmation |
| U0129/42 | Lost Communication with Brake System Control Module | Lost communication with brake actuator assembly | ·
CAN communication system ·
Brake actuator assembly |
EPS Warning Light: Comes on | After normal confirmation |
Go to CAN communication system.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT