This DTC is stored when the skid control ECU receives an internal malfunction signal from the steering angle sensor.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1433 | Steering Angle Sensor Internal Circuit | With the +BS terminal voltage 9.6 to 16.5 V, the steering angle sensor malfunction signal is received from the steering angle sensor. | Steering angle sensor |
Replace the steering angle sensor.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>STEERING ANGLE SENSOR>REMOVAL
If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.
| Proceed to |
|---|
| NEXT |
NEXT