SEAT BELT WARNING SYSTEM DESCRIPTION
Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.
Seat belt warning light operation for front passenger seat belt (for RHD):
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.
Rear seat belt warning (for RHD):
The rear seat belt warning light on the clock assembly illuminates or turns off in accordance with the rear door state, vehicle speed and rear seat belt state.
Seat belt warning buzzer:
for LHD
After turning the ignition switch to ON, if the driver seat belt is not fastened within 1.8 seconds, check that the seat belt warning buzzer in the combination meter assembly sounds at 1.2 second intervals for 6 seconds.
When the vehicle is driven at 20 km/h (12 mph) or more with the driver seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds once.
When 30 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 9.6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 20 seconds.
for RHD
When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger seat occupied and the driver, front passenger or rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds once.
When 30 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds.
After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 90 seconds.
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Front seat inner belt assembly (for driver) | Informs the main body ECU (multiplex network body ECU) of the driver seat belt condition (fastened or unfastened). |
| Front seat inner belt assembly (for front passenger)* | Informs the combination meter assembly of the front passenger seat belt condition (fastened or unfastened). |
| Occupant detection sensor (separate type front seat cushion pad)* | Informs the combination meter assembly of the front passenger seat condition (occupied or unoccupied). |
| Rear seat inner with center belt assembly LH/RH* | Informs the combination meter assembly of each rear seat belt condition (fastened or unfastened). |
| Rear door courtesy light switch assembly LH/RH* | Informs the main body ECU (multiplex network body ECU) of the rear door condition (open or closed). |
| Parking brake switch assembly | Informs the main body ECU (multiplex network body ECU) of the parking brake condition. |
| Main body ECU (multiplex network body ECU) | Sends the driver seat belt buckle switch signal, rear door courtesy light switch signal and parking brake switch signal to the combination meter assembly via CAN communication. |
| Skid control ECU | Sends the vehicle speed signal to the combination meter assembly via CAN communication. |
| ECM | Sends the shift position signal to the combination meter assembly via CAN communication. |
*: for RHD