CUSTOMIZE LIGHTING SYSTEM (EXT)
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Light Control.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Response Time | Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position | Normal | 0:Normal,1:Long | Main Body ECU (Multiplex Network Body ECU) |
| Disp Ex ON Sen | Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A | Normal | 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 | Main Body ECU (Multiplex Network Body ECU) |
| Disp Ex OFF Sen | Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B | Normal | 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 | Main Body ECU (Multiplex Network Body ECU) |
| Sensitivity | Adjusts the sensitivity of the automatic light control system.*C | Normal | 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*A
*B
*C
Customizing with Multi-display (w/ Navigation System)
Turn the ignition switch to ON.
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Light sensor sensitivity | 0 | Adjusts the sensitivity of the automatic light control system.*A | -2, -1, 0, 1 or 2 | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*A
Customizing with Radio and Display Receiver Assembly (w/ Audio and Visual System (for Radio and Display Type))
Turn the ignition switch to ON.
Enter the following menus: SETUP / Vehicle.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Light sensor sensitivity | 0 | Adjusts the sensitivity of the automatic light control system.*A | -2, -1, 0, 1 or 2 | Main Body ECU (Multiplex Network Body ECU) |
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*A