Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
RM2030EQ _58 Vehicle Interior _014672 HEATING / AIR CONDITIONING _0074651 AIR CONDITIONING SYSTEM D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  INITIALIZATION  


INITIALIZATION SERVO MOTOR


a.

Turn the ignition switch off.


b.

Connect the intelligent tester to the DLC3.


c.

Turn the ignition switch to ON.


d.

Press the A/C OFF switch.


e.

Turn the intelligent tester on.


f.

Enter the following menus: Body / Air Conditioner / Utility / Servomotor Initialization.


g.

According to the intelligent tester display, perform servomotor initialization.

Body Electrical > Air Conditioner > Utility
Tester Display
Servomotor Initialization
50005 121 174
HINT:

During initialization, the A/C AUTO indicator light comes on, and then goes off when initialization has finished.



h.

According to the intelligent tester display, select the "Exit" switch to finish initialization.