CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Entry and Start System)
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Wireless Control | Function that turns wireless door lock on or off | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Hazard Answer Back | When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice. |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Open Door Warning | The buzzer sounds when lock is pressed when any of the doors are ajar. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Unlock 2 Operation | Function that unlocks driver door when unlock switch on door control transmitter module sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Panic Function | Function to operate theft deterrent system by continuously pressing panic switch on electrical key transmitter sub-assembly for 0.8 seconds | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Trunk Lid Operation | Function to change the operation method of opening the luggage compartment door by the door control transmitter module sub-assembly.
1tim ON: Push the luggage open switch once 2tim ON: Push the luggage open switch twice Long1: Push the luggage open switch for 0.8 seconds Long2: Push the luggage open switch for 1.6 seconds Prohibit: Wireless luggage compartment door open function is off |
Long1 | 000:1tim ON,001:2tim ON,010:Long1,011:Long2,111:Prohibit | Main body ECU (Multiplex network body ECU) |
| Auto Lock Time | Function that regulates the interval between unlocking and automatic relocking of doors | 30 s | 00:30 s,01:60 s,10:120 s | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Resp | Wireless door lock buzzer response/on or off | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| P/W Wireless Ope Buzz | Wireless power window buzzer response/on or off* | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Wireless Buzzer Vol | Wireless door lock buzzer volume | Level 5 | 0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0 | Main body ECU (Multiplex network body ECU) |
*: for RHD
Customizing with the multi-display (for Navigation Receiver Type)
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle / Vehicle customization / Door Lock Setting.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Remote 2-press unlock | Off | Function that unlocks driver door when unlock switch on door control transmitter module sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock. | On or Off | Main body ECU (Multiplex network body ECU) |
| Lock/unlock feedback-lights | On | When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice. |
On or Off | Main body ECU (Multiplex network body ECU) |
| Lock feedback volume | 5 | Wireless door lock buzzer volume | 0, 1, 2, 3, 4, 5, 6 or 7 | Main body ECU (Multiplex network body ECU) |
Customizing with the multi-display (for Radio and Display Type)
Turn the ignition switch to ON.
Enter the following menus: SETUP / Vehicle.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Remote 2-press unlock | Off | Function that unlocks driver door when unlock switch on door control transmitter module sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock. | On or Off | Main body ECU (Multiplex network body ECU) |
| Lock feedback volume | 5 | Wireless door lock buzzer volume | 0, 1, 2, 3, 4, 5, 6 or 7 | Main body ECU (Multiplex network body ECU) |