Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2012.02–2015.04
RM2030EQ _56 Audio / Visual / Telematics _014659 NAVIGATION / MULTI INFO DISPLAY _0074553 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  U0073  Sending Malfunction (Navigation to APGS)  U0100  Lost Communication with ECM  U0140  Lost Communication with Body Control Module  U0155  Meter ECU Communication  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Sending Malfunction (Navigation to APGS) CAN bus connection error CAN communication system
U0100 Lost Communication with ECM CAN reception error CAN communication system
U0140 Lost Communication with Body Control Module CAN reception error CAN communication system
U0155 Meter ECU Communication CAN reception error CAN communication system

PROCEDURE

1.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check if the same DTCs are output again.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG