Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM2030EQ _56 Audio / Visual / Telematics _014658 AUDIO / VIDEO _0077308 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted  


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller's voice can be heard properly.

OK:

Voice can be heard properly.


HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



Result:
Proceed to
OK
NG



OK

2.CHECK AUDIO AND VISUAL SYSTEM

NG

REPAIR OR REPLACE CELLULAR PHONE

2.CHECK AUDIO AND VISUAL SYSTEM
a.

Check that sound from the audio system can be heard from a front speaker.

OK:

Sound can be heard from the audio system.



Result:
Proceed to
OK
NG



OK

3.CHECK SETTINGS

NG

GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE

3.CHECK SETTINGS
a.

Check that the received voice level is not set to low.

OK:

The received voice level is not set to low.



Result:
Proceed to
OK
NG



OK

NG

SET VOLUME TO HIGH