Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.
The cellular phone is registered as a connected device and "Bluetooth" settings are correct.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the cellular phone functions.
The cellular phone is unable to call under any of the following conditions:
The cellular phone is locked.
The phonebook is being transferred.
The line is crossed.
The cellular phone is outside service range.
The power is off.
The battery is low.
The cellular phone is not connected via "Bluetooth".
None of the above conditions exist.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Place the cellular phone close to the radio receiver assembly.
Set the cellular phone so that it can receive calls.
Check if the cellular phone has reception according to the radio receiver assembly.
The cellular phone has reception.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check if the cellular phone can make a call.
The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.
Cellular phone can make a call.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Restart the cellular phone.
Register the cellular phone as a connected device again and check that the malfunction disappears.
Malfunction disappears.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check if the cellular phone is "Bluetooth" compatible.
Some versions of "Bluetooth" compatible cellular phones may not function.
The phone is "Bluetooth" compatible.
| Proceed to |
|---|
| OK |
| NG |
OK
NG