Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074736 LIGHTING SYSTEM U

LIGHTING (EXT)  LIGHTING SYSTEM  FAIL-SAFE CHART  


LED HEADLIGHT SYSTEM


The light control ECU operates in fail-safe mode if an abnormal condition such as those listed below has been detected.

Item Abnormality Detection Condition Return Condition Multi-information Display
Abnormal input voltage (High input voltage) Abnormal power source voltage (more than 17 V) is detected. Normal power source voltage (10 to 16 V) is detected. "Check Headlight System" is displayed.
Abnormal input voltage (Low input voltage) Abnormal power source voltage (less than 10 V) is detected. Normal power source voltage (10 to 16 V) is detected. "Check Headlight System" is displayed.
Abnormal output
·

Open in output side circuit

·

Short between output terminal and body ground


Light control switch is turned off. "Check Headlight System" is displayed.


AUTOMATIC LIGHT CONTROL SYSTEM


If the main body ECU (multiplex network body ECU) detects a malfunction in the automatic light control sensor, the main body ECU (multiplex network body ECU) performs fail-safe control to prohibit the automatic light control. If the low beam headlights and taillights are on, the lights will remain on until the light control switch is turned off.