Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0164667 AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM D

LIGHTING (EXT)  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


a.

Automatic headlight beam level control system data and the Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.




INSPECT BATTERY VOLTAGE


a.

Measure the battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery.



DIAGNOSIS SYSTEM


a.
E301935C02
0.104,0.104 0.417,0.458 0.313,0.354 10 false *a
*a Multi-information Display


If the automatic headlight beam level control system malfunctions, "Check Headlight System" will be displayed on the multi-information display.

HINT:
·

If the headlight leveling warning is displayed, the headlight leveling ECU assembly stores DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>DTC CHECK / CLEAR

·

When the system returns to normal, "Check Headlight System" will no longer be displayed on the multi-information display.