Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074738 AUTOMATIC HIGH BEAM SYSTEM D

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


a.

Automatic high beam system data and the Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.




INSPECT BATTERY VOLTAGE


a.

Measure the battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery.



DIAGNOSIS SYSTEM


a.
E301935C09
0.104,0.104 0.417,0.458 0.313,0.354 10 false *a
*a Multi-information Display


If the automatic high beam system malfunctions, the automatic high beam indicator light will turn off and "Check Headlight System" will be displayed on the multi-information display.

HINT:
·

In this case, the main body ECU (multiplex network body ECU) stores DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR

·

When the system returns to normal, the "Check Headlight System" will no longer be displayed on the multi-information display.