Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074738 AUTOMATIC HIGH BEAM SYSTEM C

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  B124C  Automatic High Beam Camera  


DESCRIPTION

This DTC is stored when the main body ECU (multiplex network body ECU) detects a malfunction in the lane departure warning camera.

DTC No. Detection Item DTC Detection Condition Trouble Area
B124C Automatic High Beam Camera Malfunction in lane departure warning camera Lane departure warning camera

WIRING DIAGRAM

E303800E02
0.875,1.573 3.146,1.896 2.271,0.323 10 false Lane Departure Warning Camera 0.698,2.26 2.781,2.563 2.083,0.302 10 false : CAN Communication Line 4.729,1.563 6.375,2 1.646,0.438 10 false Main Body ECU (Multiplex Network Body ECU)

CAUTION / NOTICE / HINT

NOTICE:

Confirm that there are no CAN communication system malfunctions before performing the following inspection.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM


PROCEDURE

1.REPLACE LANE DEPARTURE WARNING CAMERA
a.

Replace lane departure warning camera.

Click hereEngine / Hybrid System>CRUISE CONTROL>LANE RECOGNITION CAMERA SENSOR>REMOVAL


Result:
Proceed to
NEXT



NEXT

END (LANE DEPARTURE WARNING CAMERA WAS DEFECTIVE)