Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2015.04
RM2030EQ _51 Engine / Hybrid System _014642 CRUISE CONTROL _0074459 CRUISE CONTROL SYSTEM D

CRUISE CONTROL  CRUISE CONTROL SYSTEM  ROAD TEST  


PROBLEM SYMPTOM CONFIRMATION


a.
A292434

Inspect the SET function.

i.

Turn the cruise control system on using the cruise control switch (ON-OFF button).


ii.

Check that the cruise control indicator light illuminates on the combination meter assembly.


iii.

Drive at a speed between approximately 40 km/h (25 mph) and 200 km/h (125 mph).


iv.

Push the cruise control switch to -/SET.


v.
A229932C05
2.104,0.5 2.417,0.698 0.313,0.198 10 false *1 2.104,1.385 2.417,1.583 0.313,0.198 10 false *2
*1 Cruise Control Indicator Light
*2 Cruise Control SET Indicator


Check that the cruise control SET indicator light illuminates at this time.


vi.

After releasing the switch, check that the vehicle maintains the set speed.



b.
A292435

Inspect the + (ACCEL) function.

i.

Turn the cruise control system on using the cruise control switch (ON-OFF button).


ii.

Drive at a speed between approximately 40 km/h (25 mph) and 200 km/h (125 mph).


iii.

Push the cruise control switch to -/SET.


iv.

Check that vehicle speed increases while the cruise control switch is pushed to +/RES, and that the vehicle maintains the newly set speed when the switch is released.


v.

Push the cruise control switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.0 km/h or 1.0 mph (tap-up control).



c.
A292434

Inspect the - (COAST) function.

i.

Turn the cruise control system on using the cruise control switch (ON-OFF button).


ii.

Drive at a speed between approximately 40 km/h (25 mph) and 200 km/h (125 mph).


iii.

Push the cruise control switch to -/SET.


iv.

Check that vehicle speed decreases while the cruise control switch is pushed to -/SET, and the vehicle maintains the newly set speed when the switch is released.


v.

Push the cruise control switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.0 km/h or 1.0 mph (tap-down control).



d.
A292436

Inspect the CANCEL function.

i.

Turn the cruise control system on using the cruise control switch (ON-OFF button).


ii.

Drive at a speed between approximately 40 km/h (25 mph) and 200 km/h (125 mph).


iii.

Push the cruise control switch to -/SET.


iv.

When any of the following are performed, check that cruise control system control of vehicle speed is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.

·

Depressing the brake pedal.

·

Moving the shift lever from D or S to any other position.

·

Selecting the 3rd, 2nd or 1st range with the shift lever in S.

·

Selecting the 3rd, 2nd, or 1st range using the shift paddle switch with the shift lever in D or S (w/ Shift paddle switch).

·

Pulling the cruise control switch to CANCEL.

·

Turning the cruise control system off using the cruise control switch (ON-OFF button).




e.
A292435

Inspect the RES (RESUME) function.

i.

Turn the cruise control system on using the cruise control switch (ON-OFF button).


ii.

Drive at a speed between approximately 40 km/h (25 mph) and 200 km/h (125 mph).


iii.

Push the cruise control switch to -/SET.


iv.

Cancel cruise control system control of vehicle speed by performing any of the above operations (other than turning the cruise control system off using the cruise control switch (ON-OFF button)).


v.

After pushing the cruise control switch to +/RES at a speed of more than approximately 40 km/h (25 mph), check that the vehicle resumes the speed set prior to cancellation.