Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.04
RM2030EQ _51 Engine / Hybrid System _014642 CRUISE CONTROL _0165902 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  DIAGNOSIS SYSTEM  


DIAGNOSIS FUNCTION


a.
E284062C01
0.667,0.667 0.917,0.833 0.25,0.167 10 false *a 1.583,0.333 1.833,0.5 0.25,0.167 10 false *b
*a Master Warning Light
*b Lane Departure Alert Indicator


The diagnosis function makes the master warning light and the multi-information display turn on, and the lane departure alert indicator turns off as shown in the illustration. When a malfunction occurs in the lane departure alert system, DTCs are stored in the lane departure warning camera.

NOTICE:

The master warning light turns off if the system returns to a normal condition.




CHECK INDICATOR


E284062C01
0.667,0.667 0.917,0.833 0.25,0.167 10 false *a 1.583,0.333 1.833,0.5 0.25,0.167 10 false *b
*a Master Warning Light
*b Lane Departure Alert Indicator


a.

When a malfunction occurs in the lane departure alert system, the system turns off the lane departure alert indicator and the master warning light illuminates at the same time a "pong" sound is heard. Also, "Check LDA System" is displayed in the combination meter assembly and the lane departure warning camera stores DTCs.

NOTICE:

If DTCs related to the communication system are stored, "Check LDA System", which is displayed in the combination meter assembly, disappears when the system returns to normal.

If DTCs not related to the communication system are stored, "Check LDA System", which is displayed in the combination meter assembly, disappears when the engine switch is turned off then back on (IG) after the system returns to normal.