Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2015.04
RM2030EQ _51 Engine / Hybrid System _014642 CRUISE CONTROL _0165902 LANE DEPARTURE ALERT SYSTEM C

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  U0100  Lost Communication with ECM  U0101  Lost Communication With TCM  U0123  Lost Communication with Yaw Rate Sensor Module  U0129  Lost Communication with Brake System Control Module  U0142  Lost Communication with Body Control Module "B"  U0155  Lost Communication with Instrument Panel Cluster (IPC) Control Module (Combination Meter)  


DESCRIPTION

These DTCs are stored when a communication malfunction occurs between the sensors and ECUs.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0100 Lost Communication with ECM While the engine switch is on (IG), communication between the ECM and lane departure warning camera stops for 5 seconds or more.
·

CAN communication system

·

ECM

·

Lane departure warning camera


U0101 Lost Communication With TCM While the vehicle is being driven at 1 km/h or 1 mph or more, communication between the ECM and lane departure warning camera stops for 5 seconds or more.
·

CAN communication system

·

ECM

·

Lane departure warning camera


U0123 Lost Communication with Yaw Rate Sensor Module While the vehicle is being driven at 1 km/h or 1 mph or more, communication between the yaw rate sensor and lane departure warning camera stops for 5 seconds or more.
·

CAN communication system

·

Airbag sensor assembly (Yaw rate sensor)

·

Lane departure warning camera


U0129 Lost Communication with Brake System Control Module While the engine switch is on (IG), communication between the skid control ECU and lane departure warning camera stops for 5 seconds or more.
·

CAN communication system

·

Skid control ECU (brake actuator assembly)

·

Lane departure warning camera


U0142 Lost Communication with Body Control Module "B" While the engine switch is on (IG), communication between the main body ECU (multiplex network body ECU) and lane departure warning camera stops for 5 seconds or more.
·

CAN communication system

·

Main body ECU (Multiplex network body ECU)

·

Lane departure warning camera


U0155 Lost Communication with Instrument Panel Cluster (IPC) Control Module (Combination Meter) While the engine switch is on (IG), communication between the combination meter assembly and lane departure warning camera stops for 50 seconds or more.
·

CAN communication system

·

Combination meter assembly

·

Lane departure warning camera



PROCEDURE

1.CHECK FOR DTCS (LANE DEPARTURE ALERT SYSTEM)
a.

Clear the DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>DTC CHECK / CLEAR

Chassis > Lane Departure Alert > Clear DTCs
50002 355

b.

Check for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>LANE DEPARTURE ALERT SYSTEM>DTC CHECK / CLEAR

Chassis > Lane Departure Alert > Trouble Codes
50001 355
Result:
Result Proceed to
CAN communication system DTCs are not output A
CAN communication system DTCs are output B




A

B