Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074720 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL GROMMET

a.
E226742

Install the grommet.


Hide 81134 2.INSTALL HEADLIGHT GASKET (for LED Headlight)

a.

Install a new headlight gasket.


Hide 81108 3.INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for LED Headlight)

a.
E241044

Connect the 2 connectors.


b.
E241043

Install the headlight light control ECU sub-assembly with the 4 screws.


Hide 85669 4.INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING (for LED Headlight)

a.

Install a new headlight leveling motor base packing.


Hide 85662 5.INSTALL HEADLIGHT LEVELING MOTOR (for LED Headlight)

a.
E241042C08
1.177,1.417 2.125,1.354 false 2.167,1.281 2.333,1.438 0.167,0.156 10 false *a 1.24,1.854 1.458,2.094 0.219,0.24 10 true 1 0.646,1.25 0.854,1.5 0.208,0.25 10 true 2
*a Aiming Screw


Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.


b.

Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

HINT:

Turn the aiming screw the same number of times as it was turned during removal.



c.
E241040C08
1.177,1.417 2.125,1.354 false 2.156,1.271 2.323,1.427 0.167,0.156 10 false *a 2.031,0.542 2.26,0.781 0.229,0.24 10 true 3 0.635,1.25 0.844,1.49 0.208,0.24 10 true 4
*a Aiming Screw


Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration and engage the pin to install the headlight leveling motor to the headlight unit.

HINT:

When installing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction of the arrow (3) shown in the illustration.



d.

Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to install it.

HINT:

Turn the aiming screw the same number of times as it was turned during removal.



Hide 81610F 6.INSTALL CLEARANCE LIGHT BULB

a.

for Halogen Headlight:

i.

Install the clearance light bulb to the clearance light socket.


ii.
E314729

Turn the clearance light socket with the clearance light bulb as shown in the illustration to install them as a unit.



b.

for LED Headlight:

i.

Install the clearance light bulb to the clearance light socket.


ii.
E241038

Turn the clearance light socket with the clearance light bulb as shown in the illustration to install them as a unit.



Hide 81510C 7.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

for Halogen Headlight:

i.

Install the front turn signal light bulb to the front turn signal light socket.


ii.
E314727

Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to install them as a unit.



b.

for LED Headlight:

i.

Install the front turn signal light bulb to the front turn signal light socket.


ii.
E241036

Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to install them as a unit.



Hide 81144C 8.INSTALL HEADLIGHT SOCKET COVER

a.

for Halogen Headlight:

i.

Install the 2 headlight socket covers to the headlight unit.



b.

for LED Headlight:

i.

Install the headlight socket cover to the headlight unit.



Hide 81110D 9.INSTALL NO. 2 HEADLIGHT BULB (for Halogen Headlight)

a.
E314725

Turn the No. 2 headlight bulb as shown in the illustration to install it.

NOTICE:

Do not touch the bulb glass.



Hide 81110B 10.INSTALL NO. 1 HEADLIGHT BULB

a.
E314723

Turn the No. 1 headlight bulb as shown in the illustration to install it.

NOTICE:

Do not touch the bulb glass.