Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM › from 2015.04
RM2030EQ _56 Audio / Visual / Telematics _014660 PARK ASSIST / MONITORING _0074557 PARKING ASSIST MONITOR SYSTEM D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system has a rear television camera assembly mounted on the luggage compartment door to display an image of the area behind the vehicle on the multi-display. The multi-display also shows a composite view consisting of the area behind the vehicle and parking guide lines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.


b.

This system consists of the following components:

i.

Rear television camera assembly


ii.

Navigation receiver assembly*1


iii.

Radio and display receiver assembly*2


iv.

Steering sensor


v.

ECM


vi.

Main body ECU (multiplex network body ECU)


vii.

Skid control ECU


viii.

Clearance warning ECU assembly


ix.

Power steering ECU assembly

*1: w/ Navigation System

*2: w/o Navigation System




c.

This system is equipped with a self-diagnosis system, which is operated on a designated window that appears on the multi-display.



FUNCTION OF COMPONENTS


a.

The rear television camera assembly controls the system by using information from the following components.

Item Function
Rear Television Camera Assembly
·

Mounted on the luggage compartment door to transmit a composite image of the area behind the vehicle and guide lines calculated based on signals received from each ECU, to the navigation receiver assembly*1 or radio and display receiver assembly*2.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and wide-angle lens.

·

Stops displaying the guide lines when an open signal is received for the luggage compartment door.

·

Performs overall control of the system by receiving signals from the sensor and ECUs.


·

Navigation Receiver Assembly*1

·

Radio and Display Receiver Assembly*2


·

Receives video signals which contain a composite image of the area behind the vehicle taken with the rear television camera assembly and guide lines calculated based on signals received from each ECU.

·

Performs control of the system by receiving the reverse signal from the ECM.

·

Transmits the setting information signal to the rear television camera assembly via CAN communication.

·

Receives diagnostic mode video signals from the rear television camera assembly.

·

Displays "Back door is open. Do not use the rear view monitor when the back door is not completely closed." on the back camera position setting screen when the luggage compartment door is open.


Steering Sensor Detects the angle of the steering wheel and transmits the resulting signals to the rear television camera assembly via CAN communication.
ECM Transmits the reverse signal and vehicle information signal to the rear television camera assembly and navigation receiver assembly*1 or radio and display receiver assembly*2 via CAN communication.
Brake Actuator Assembly
- Skid Control ECU
Transmits the vehicle speed signal to the rear television camera assembly via CAN communication.
Main Body ECU (Multiplex Network Body ECU) Transmits the luggage compartment door courtesy switch signal to the rear television camera assembly via CAN communication.
Clearance Warning ECU Assembly Transmits the sonar information signal to the rear television camera assembly via CAN communication.
Power Steering ECU Assembly Transmits an EPS variation signal to the rear television camera assembly via CAN communication.

*1: w/ Navigation System

*2: w/o Navigation System




OPERATION EXPLANATION


a.

The navigation receiver assembly*1 or radio and display receiver assembly*2 receives the reverse signal when the engine switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the multi-display switches to the parking assist monitor system.

*1: w/ Navigation System

*2: w/o Navigation System




DISPLAY MODE


E286104C02
1.063,1.417 1.375,1.615 0.313,0.198 10 false *a 3.531,1.406 3.844,1.604 0.313,0.198 10 false *b 5.854,1.406 6.167,1.604 0.313,0.198 10 false *c
*a Estimated Course Line Display Mode *b Parking Assist Guide Line Display Mode
*c Distance Guide Line Display Mode - -


Parking Assist Monitor Display Mode
Parking Assist Monitor Display Mode Distance Guide Lines
(Red)
Estimated Course Lines
(Yellow)
Distance Guide Line
(Yellow)
Vehicle Width Extension Guide Line
(Blue)
Distance Guide Line
(Blue)
Parking Assist Guide Lines
(Blue)
Estimated course line display mode Displayed Displayed Displayed Displayed Displayed Not displayed
Parking assist guide line display mode Displayed Not displayed Not displayed Displayed Not displayed Displayed
Distance guide line display mode Displayed Not displayed Not displayed Not displayed Not displayed Not displayed


DIAGNOSTIC FUNCTION OUTLINE


a.

This parking assist monitor system has a diagnostic function displayed on the multi-display. This function enables calibration (adjustment and verification) of the parking assist monitor system.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>DIAGNOSIS SYSTEM


b.

The following items for the parking assist monitor system can be checked using the GTS.

Item Proceed to
DTC (Click here)
Data List / Active Test (Click here)