52536
1.INSTALL FRONT BUMPER SIDE RETAINER LH
Engage the 2 claws.
Install the front bumper side retainer LH withe bolt and screw.
52535
2.INSTALL FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52021
3.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Install the front bumper reinforcement sub-assembly with the 6 bolts.
Engage the 5 clamps.
52611
4.INSTALL FRONT BUMPER ENERGY ABSORBER
Engage the 2 guides to install the front bumper energy absorber.
52129B
5.INSTALL LOWER FRONT BUMPER COVER
| *a | Hook |
Engage the hook.
Engage the 2 claws to install the lower front bumper cover.
52128C
6.INSTALL FRONT BUMPER HOLE COVER LH
Engage the 4 claws.
Install the front bumper hole cover LH with the screw.
52127D
7.INSTALL FRONT BUMPER HOLE COVER RH
Use the same procedure as for the LH side.
53112E
8.INSTALL NO. 1 LOWER RADIATOR GRILLE
Engage the 18 claws to install the No. 1 lower radiator grille.
75310A
9.INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY
Engage the guide and 3 claws to install the radiator grille emblem assembly.
10.INSTALL RADIATOR GRILLE SUB-ASSEMBLY
Engage the 10 claws to install the radiator grille sub-assembly.
53879H
11.INSTALL FRONT FENDER LINER RETAINER
Engage the claw and install the front fender liner retainer.
Use the same procedure for the RH side and LH side.
81220
12.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
13.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
89348
14.INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
89341A
15.INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
52114A
16.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for LHD)
Install the front bumper extension mounting bracket with the 2 screws.
76877A
17.INSTALL FRONT SPOILER PROTECTOR (w/ Front Spoiler)
Use the same procedure for the RH side and LH side.
Clean the front spoiler.
Remove any remaining double-sided tape from the front spoiler.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new front spoiler protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
|
Double-sided Tape |
Install the front spoiler protector as shown in the illustration.
76869B
18.INSTALL NO. 2 FRONT SPOILER SIDE PROTECTOR LH (w/ Front Spoiler)
Clean the front spoiler.
Remove any remaining double-sided tape from the front spoiler.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new No. 2 front spoiler side protector LH.
After removing the release paper, keep the exposed adhesive free from foreign matter.
|
Double-sided Tape |
Install the No. 2 front spoiler side protector LH as shown in the illustration.
76859B
19.INSTALL NO. 2 FRONT SPOILER SIDE PROTECTOR RH (w/ Front Spoiler)
Use the same procedure as for the No. 2 front spoiler side protector LH.
76878A
20.INSTALL FRONT SPOILER SIDE PROTECTOR LH (w/ Front Spoiler)
Clean the front spoiler.
Remove any remaining double-sided tape from the front spoiler.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new front spoiler side protector LH.
After removing the release paper, keep the exposed adhesive free from foreign matter.
|
Double-sided Tape |
Install the front spoiler side protector LH as shown in the illustration.
76877D
21.INSTALL FRONT SPOILER SIDE PROTECTOR RH (w/ Front Spoiler)
Use the same procedure as for the front spoiler side protector LH.
76878B
22.INSTALL FRONT SPOILER SIDE PROTECTOR (w/ Front Spoiler)
Use the same procedure for the RH side and LH side.
Clean the front spoiler.
Remove any remaining double-sided tape from the front spoiler.
Wipe off any tape adhesive residue with cleaner.
Remove the release paper from a new front spoiler side protector.
After removing the release paper, keep the exposed adhesive free from foreign matter.
|
Double-sided Tape |
Install the front spoiler side protector as shown in the illustration.
23.INSTALL FRONT SPOILER SUB-ASSEMBLY (w/ Front Spoiler)
Clean the front bumper assembly.
Remove any remaining double-sided tape from the front bumper assembly.
Wipe off any tape residue with cleaner.
Remove each release paper.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Temporarily install the front spoiler sub-assembly to the front bumper cover as shown in the illustration.
|
Double-sided Tape | - | - |
Install the front spoiler sub-assembly with the 2 screws.