When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, name plates or emblem excessively.
75431
1.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 2 pins and install the luggage compartment door emblem.
75442
2.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate as shown in the illustration.
| *a | Release Paper | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 8.9 mm (0.35 in.) | B | 51.5 mm (2.03 in.) |
75441A
3.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new No. 1 luggage compartment door name plate.
Remove the release paper from the No. 1 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 luggage compartment door name plate as shown in the illustration.
| *a | Release Paper | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 49.6 mm (1.95 in.) | B | 13.3 mm (0.524 in.) |
| C | 56.1 mm (2.21 in.) | D | 13.2 mm (0.520 in.) |
| E | 50.6 mm (1.99 in.) | F | 7.7 mm (0.303 in.) |
| G | 17.4 mm (0.685 in.) | H | 12.5 mm (0.492 in.) |
| I | 27.2 mm (1.07 in.) | J | 8.6 mm (0.339 in.) |
| K | 56.3 mm (2.22 in.) | L | 13.3 mm (0.524 in.) |
75443A
4.INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new No. 3 luggage compartment door plate.
Remove the release paper from the No. 3 luggage compartment door plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 3 luggage compartment door plate as shown in the illustration.
| *a | Release Paper | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 55.0 mm (2.17 in.) | B | 13.1 mm (0.516 in.) |
| C | 40.1 mm (1.58 in.) | D | 23.7 mm (0.933 in.) |