Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074722 FOG LIGHT ASSEMBLY G

LIGHTING (EXT)  FOG LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81220 1.INSPECT FOG LIGHT ASSEMBLY LH

a.
E310109C02
0.219,0.188 0.469,0.5 0.25,0.313 10 false *a
*a Component without harness connected
(Fog Light Assembly LH)


Apply battery voltage to the fog light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Fog light comes on


If the result is not as specified, replace the fog light assembly LH.


Hide 81210A 2.INSPECT FOG LIGHT ASSEMBLY RH

a.
E310109C03
0.219,0.188 0.469,0.5 0.25,0.313 10 false *a
*a Component without harness connected
(Fog Light Assembly RH)


Apply battery voltage to the fog light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Fog light comes on


If the result is not as specified, replace the fog light assembly RH.