Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE DOOR HINGE TORSION BAR › from 2015.04
RM2030EQ _59 Vehicle Exterior _014677 DOOR / HATCH _0074694 LUGGAGE DOOR HINGE TORSION BAR A

DOOR / HATCH  LUGGAGE DOOR HINGE TORSION BAR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


PROCEDURE

Hide 64127B 1.INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

a.
B280586

Install a new luggage compartment door torsion bar support as shown in the illustration.


Hide 64531 2.INSTALL LUGGAGE DOOR HINGE TORSION BAR RH

a.

Check the identification mark on the luggage door hinge torsion bar RH.

Color:

Brown



b.
B280587C07
1.948,1.656 1.844,1.875 false 1.969,1.469 2.583,0.969 2.583,0.969 2.135,1.625 false 1.75,1.865 2.115,2.115 0.365,0.25 10 false *a 2.615,0.844 3.021,1.094 0.406,0.25 10 false *b
*a Installation Hole
*b Installation Hole (For Adjustment)


Set the tip of the luggage door hinge torsion bar RH in the center installation hole. The upper and lower installation holes are used for adjustment.


c.
B280584

Connect the luggage door hinge torsion bar RH to the left side of the vehicle body as shown in the illustration.


d.
B280582

Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support as shown in the illustration.


e.
B280580E01
2.135,1.76 2.271,1.469 false 2.844,2.74 2.688,2.74 2.688,2.74 2.427,3.406 false 2.49,0.427 2.917,0.75 0.427,0.323 10 false (1) 2.552,4.115 2.875,4.365 0.323,0.25 10 false (2) 1.063,3.344 1.417,3.615 0.354,0.271 10 false (3) 1.958,1.792 2.396,2.042 0.438,0.25 10 false SST 2.906,2.646 3.354,2.979 0.448,0.333 10 false SST

Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and the right side of the vehicle body as shown in the illustration.

SST
09804-24010  


f.

Remove the protective tape.


Hide 64532 3.INSTALL LUGGAGE DOOR HINGE TORSION BAR LH

a.

Check the identification mark on the luggage door hinge torsion bar LH.

Color:

Blue



b.
B280588C07
1.948,1.271 2.25,1.583 false 1.896,1.104 1.479,0.885 1.479,0.885 1.771,1.271 false 2.177,1.583 2.521,1.854 0.344,0.271 10 false *a 1.313,0.792 1.635,1.063 0.323,0.271 10 false *b
*a Installation Hole
*b Installation Hole (For Adjustment)


Set the tip of the luggage door hinge torsion bar LH in the center installation hole. The upper and lower installation holes are used for adjustment.


c.
B280578

Connect the luggage door hinge torsion bar LH to the right side of the vehicle body as shown in the illustration.


d.
B280576

Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support as shown in the illustration.


e.
B280574E01
0.906,2.063 0.938,1.552 false 0.594,2.802 0.698,2.802 0.698,2.802 0.896,3.417 false 0.635,0.438 1.083,0.781 0.448,0.344 10 false (1) 0.344,3.844 0.75,4.156 0.406,0.313 10 false (2) 1.99,3.531 2.406,3.844 0.417,0.313 10 false (3) 0.26,2.698 0.688,2.979 0.427,0.281 10 false SST 0.781,2.073 1.24,2.458 0.458,0.385 10 false SST

Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and the left side of the vehicle body as shown in the illustration.

SST
09804-24010  


f.
B280572

Engage the 2 claws as shown in the illustration.


g.
B288537E01
2.281,1.667 2.635,1.927 0.354,0.26 10 false (1) 2.854,1.771 3.198,2.021 0.344,0.25 10 false (2)

Connect the rear seatback lock assembly LH (rear seat lock control cable LH) and engage the hook in the order indicated in the illustration.

HINT:

Use the same procedure as for the LH side and RH side.



h.

Remove the protective tape.


Hide 64572 4.INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

a.

Engage the 4 claws and install the luggage compartment door hinge cover LH.


Hide 64571B 5.INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 64722 6.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH

a.

Install the 3 clips.


b.

Engage the fastener and install the luggage compartment inner trim cover LH.


Hide 64721 7.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

a.

Install the 3 clips.


b.

Engage the fastener and install the luggage compartment inner trim cover RH.


Hide 64725D 8.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

a.
B293417C01
2.063,2.323 1.656,2.615 false 1.479,2.583 1.844,2.865 0.365,0.281 10 false *1
*1 Pin


Engage the 2 pins to install the 2 No. 1 luggage compartment trim hooks.


Hide 58387 9.INSTALL REAR FLOOR FINISH PLATE

a.
B308606

Engage the 4 clips and install the rear floor finish plate.


b.

Install the 5 clips.


Hide 64711 10.INSTALL LUGGAGE COMPARTMENT FLOOR MAT

a.

Install the luggage compartment floor mat.