Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2015.04
RM2030EQ _56 Audio / Visual / Telematics _014659 NAVIGATION / MULTI INFO DISPLAY _0074553 NAVIGATION SYSTEM D

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  SYSTEM DESCRIPTION  


NAVIGATION SYSTEM OUTLINE


a.

Vehicle position tracking methods

It is essential that the navigation system correctly tracks the current vehicle position and displays it on the map. There are 2 methods to track the current vehicle position: autonomous (dead reckoning) and GPS* (satellite) navigation. Both navigation methods are used in conjunction with each other.

*: GPS (Global Positioning System)

E226074E24
5.99,2.198 6.667,2.198 6.667,2.198 6.667,3.188 false 5.063,1.813 5.99,1.813 5.99,1.813 5.99,3.396 false 5.99,3.396 2.927,3.396 2.927,3.396 2.927,3.042 false 0.375,0.313 1.396,0.521 1.021,0.208 10 false GPS Satellite 6.323,3.24 7.156,3.792 0.833,0.552 10 false Location by Autonomous Navigation 3.781,1.135 5.094,1.406 1.313,0.271 10 false Navigation System 3.969,1.698 5.167,2.094 1.198,0.396 10 false Gyro Sensor 4.219,2.406 4.74,2.688 0.521,0.281 10 false ECU 1.99,1.844 3.24,2.24 1.25,0.396 10 false Navigation Antenna Assembly 1.938,2.583 3.365,2.792 1.427,0.208 10 false Vehicle Speed Signal 0.073,2.01 1.188,2.375 1.115,0.365 10 false Location by GPS Navigation 0.417,5.26 1.625,5.625 1.208,0.365 10 false Navigation Antenna Assembly 0.5,4.552 1.604,4.917 1.104,0.365 10 false Receive Satellite Signals 0.344,6.656 1.771,6.865 1.427,0.208 10 false Vehicle Speed Signal 0.5,5.896 1.542,6.26 1.042,0.365 10 false Detect Vehicle Driving Distance 2.719,3.802 5.063,4.146 2.344,0.344 10 false Navigation Receiver Assembly 2.292,4.646 3.323,4.99 1.031,0.344 10 false Current Position Calculation 4.208,4.667 5.271,4.885 1.063,0.219 10 false GPS Correction 4.01,5.833 5.469,6.198 1.458,0.365 10 false Create Current Vehicle Position Tracking Data 2.198,6.604 3.302,6.99 1.104,0.385 10 false Direction Change Detection 2.281,7.354 3.271,7.563 0.99,0.208 10 false Gyro Sensor 2.25,7.833 3.219,8.208 0.969,0.375 10 false Map Matching Correction 3.917,7.844 5.531,8.219 1.615,0.375 10 false Map and Current Vehicle Position Data Processing 5.042,6.698 5.875,7.073 0.833,0.375 10 false Multi-display Screen 2.469,8.875 3.479,9.219 1.01,0.344 10 false Map Data 4.063,8.833 5.333,9.094 1.271,0.26 10 false Map Scrolling 4.063,9.156 5.396,9.5 1.333,0.344 10 false Map Scale Switching

Operation Description
Vehicle Position Calculation The navigation receiver assembly calculates the current vehicle position (direction and current position) using the direction deviation signal from the gyro sensor and driving distance signal calculated from the vehicle speed signal and creates the driving route.
Map Display Processing The navigation receiver assembly processes the vehicle position data, vehicle driving track and map data from the SD card (disc player disc).
Map Matching The map data from the SD card (disc player disc) is compared to the vehicle position and driving track data. Then, the vehicle position is matched with the nearest road.
GPS Correction The vehicle position is matched to the position measured by the GPS. Then, the GPS measurement position data is compared with the vehicle position and driving track data. If the position is very different, the GPS measurement position is used.
Distance Correction The vehicle speed signal includes errors caused by tire wear and slippage between the tires and road surface. Distance correction is performed to account for this. The navigation receiver assembly automatically offsets the signal to make up for the difference between it and the distance data of the map. The offset is automatically updated.

E228757E33
0.156,0.521 2.469,0.969 2.313,0.448 10 Navigation functions even where GPS signals do not reach. 2.708,3.344 4.354,3.552 1.646,0.208 10 Autonomous Navigation 4.458,3.781 6.354,4.5 1.896,0.719 10 Autonomous Navigation and GPS Signal Navigation 5.813,1.438 6.719,1.656 0.906,0.219 10 GPS Satellite 0.271,1.427 1.271,1.635 1,0.208 10 - In a tunnel 0.271,1.802 1.958,1.99 1.688,0.188 10 - In an indoor parking lot 0.271,2.177 1.938,2.406 1.667,0.229 10 - Between tall buildings 0.271,2.573 1.688,2.792 1.417,0.219 10 - Under an overpass 0.271,2.969 2.552,3.177 2.281,0.208 10 - In a forest or on a tree-lined path

HINT:

The combination of autonomous and GPS navigation makes it possible to display the vehicle position even when the vehicle is in places where GPS signals cannot be received. When only autonomous navigation is used, however, the mapping accuracy may slightly decrease.



b.

Autonomous navigation

This method determines the relative vehicle position based on the driving track determined by the gyro sensor located in the navigation receiver assembly and the vehicle speed signal.

i.

Gyro sensor

Used to calculate the direction by detecting angular velocity. It is located in the navigation receiver assembly.


ii.

Vehicle speed signal

Used to calculate the vehicle driving distance.



c.

GPS* navigation (Satellite navigation)

This method detects the absolute vehicle position using radio waves from GPS satellites.

*: GPS satellites were launched by the U.S. Department of Defense for military purposes.

E228758E01
0.485,0.491 6.397,0.702 5.912,0.211 10 Current longitude/latitude/altitude is determined using the signal arrival time from four satellites. 4.909,3.095 5.319,3.310 0.410,0.214 10 GPS

Number of Satellites Measurement Description
2 or less Measurement is impossible Vehicle position cannot be obtained because the number of satellites is not enough.
3 2-dimensional measurement is possible Vehicle position is obtained based on the current longitude and latitude. (This is less precise than 3-dimensional measurement.)
4 3-dimensional measurement is possible Vehicle position is obtained based on the current longitude, latitude and altitude.


d.

Map matching

The current driving route is calculated by autonomous navigation (according to the gyro sensor and vehicle speed signal) and GPS navigation. This information is then compared with possible road shapes from the map data in the SD card (disc player disc) and the vehicle position is set onto the most appropriate road.

E228759E05
1.854,1.771 2.25,0.188 2.25,0.188 2.406,0.188 false 2.333,1.74 2.875,0.448 2.875,0.448 3.01,0.448 false 2.771,1.906 3.385,0.74 3.385,0.74 3.521,0.74 false 1.479,3.135 1.604,3.323 0.125,0.188 10 A 0.51,0.531 0.927,0.729 0.417,0.198 10 Start 1.385,4.104 1.99,4.771 0.604,0.667 10 Map Matching 5.135,1.167 6.448,1.365 1.313,0.198 10 Actual driving route 5.115,1.427 6.854,1.813 1.74,0.385 10 Driving route on the display (Route by estimation) 5.625,2.031 6.104,2.25 0.479,0.219 10 Roads 3.865,2.031 4.083,2.25 0.219,0.219 10 L1 3.583,2.563 6.781,3.438 3.198,0.875 10 The system compares the shape of roads L1, L2 and L3 to the estimated driving track after the vehicle makes a right turn. At point A, the vehicle position differs enough from the shape of L1 that the display switches to road L2. 3.052,0.365 3.24,0.51 0.188,0.146 10 L2 2.458,0.115 2.656,0.26 0.198,0.146 10 L1 3.583,0.656 3.792,0.802 0.208,0.146 10 L3 4.354,2.031 4.573,2.25 0.219,0.219 10 L2 4.844,2.031 5.063,2.25 0.219,0.219 10 L3



TOUCH SWITCH OUTLINE


a.

Touch switches are touch-sensitive (interactive) switches operated by touching the screen. When a switch is pressed, the outer film bends in to contact the inner glass at the pressed position. By doing this, the voltage ratio is measured and the pressed position is detected.

E228760E05
1.677,1.146 2.24,0.885 false 1.979,0.854 1.646,0.76 false 1.167,0.302 1.625,0.5 0.458,0.198 10 Outer 2.677,0.302 3.104,0.5 0.427,0.198 10 Inner 1.271,1.052 1.75,1.25 0.479,0.198 10 Glass 1.354,0.656 1.729,0.854 0.375,0.198 10 Film 2.594,0.813 3.354,1.01 0.76,0.198 10 Vx1 (Vy1) 2.583,1.844 3.344,2.052 0.76,0.208 10 Vx2 (Vy2) 4.615,1.083 4.927,1.292 0.313,0.208 10 Vy1 4.615,2.219 4.948,2.427 0.333,0.208 10 Vy2 3.74,1.635 4.094,1.833 0.354,0.198 10 Vx1 6.281,1.635 6.625,1.833 0.344,0.198 10 Vx2 3.781,2.729 6.604,3.115 2.823,0.385 10 The touch switch detects the voltage ratio and calculates the position on the screen. 1.125,3 3.219,3.229 2.094,0.229 10 Touch-sensitive switch position 2.677,1.146 3.302,1.313 0.625,0.167 10 Contact



DISC PLAYER OUTLINE


a.

A disc player uses a laser pickup to read digital signals recorded on a disc. By converting the digital signals to analog, it can play music, video and audio.

CAUTION:

Do not look directly at the laser pickup because the disc player uses an invisible laser beam. Be sure to operate the player only as instructed.


NOTICE:
·

Do not disassemble any part of the disc player.

·

Do not apply oil to the disc player.

·

Do not insert anything but a disc into the disc player.




b.

This player can play only audio CDs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) that have any of the following marks:

E119759


c.

This player can play only DVD video discs that have any of the following marks:

E215423


d.

This player can play only DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) that were recorded in video format and that have any of the following marks:

E170098


e.

The following products may not be playable on your player.

·

SACD

·

dts CD

·

Copy-protected CD

·

DVD audio

·

DVD-RAM



f.

Precautions for use of discs

NOTICE:
·

CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) may not be played depending on the recording conditions or characteristics of the discs, or due to damage, dirt or deterioration caused by leaving the discs in the cabin for a long time.

·

Unfinalized CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) cannot be played.

·

CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not be played.

·

If there are fingerprints or scratches on a disc, the disc may not be played or the disc may skip.

·

Some CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) may deteriorate if they are left in the cabin for a long time.

·

Keep CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) in an opaque case.

·

SECAM color television standard discs cannot be played.

·

DualDiscs that mate DVD recorded material on one side with CD digital audio material on the other cannot be played.

·

Keep discs away from dirt. Be careful not to damage the discs or leave fingerprints on them.

·

Hold discs by the outer edge and center hole with the label side up.

·

Leaving a disc exposed halfway out of the slot for a long time after pressing the disc eject button may cause deformation of the disc, making the disc unusable.

·

If discs have adhesive tape, stickers, disc labels or any traces of such labels attached, the discs may not be ejected or player malfunctions may result.

·

Keep discs away from direct sunlight. (Exposure to direct sunlight may cause deformation of the disc, making the disc unusable.)

·

Do not use odd-shaped discs because these may cause player malfunctions.

·

Do not use discs whose recording portion is transparent or translucent because they may not be inserted, ejected or played normally.

·

Use only 4.7 in. (12 cm) discs.

·

Do not use 3 in. (8 cm) discs either with or without adaptors.



HINT:
·

When it is cold or raining, if the windows fog up, mist and condensation may form in the player. In such cases, the disc may skip or stop in the middle of play. Ventilate or dehumidify the cabin for a while before using the player.

·

The disc may skip if the player experiences strong vibrations when the vehicle is driven on rough roads or similar uneven surfaces.




g.
I100151

Cleaning

NOTICE:

Do not use a lens cleaner because it may cause a malfunction in the pickup portion of the player.


i.

If dirt is on the disc surface, wipe it clean with a soft dry cloth such as an eyeglass cleaner for plastic lenses from the inside to the outside in a radial direction.

NOTICE:
·

Pressing on the disc by hand or rubbing the disc with a hard cloth may scratch the disc surface.

·

Use of solvents such as record spray, antistatic agents, alcohol, benzine, thinners or a chemical cloth may cause damage to the disc, making the disc unusable.






USB FUNCTION OUTLINE


a.

USB audio system

i.

The No. 1 stereo jack adapter assembly is equipped with a USB connector. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, it is also possible to play MP3, WMA or AAC files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.

HINT:

Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.




b.

USB video system

i.

The No. 1 stereo jack adapter assembly is equipped with a USB connector. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows video files to be played. Not only is it possible to play video from a USB device with a video function, it is also possible to play WMV, AVI, MP4 or M4V files that are stored on a USB device.

HINT:

Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.




c.

USB photo

i.

The No. 1 stereo jack adapter assembly is equipped with a USB connector. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows photo files to be viewed. Not only is it possible to view photos from a USB device with a photo function, it is also possible to view JPG files that are stored on a USB device.

HINT:

Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.




d.

USB compatible devices

i.

USB device

The following device formats can be used:

Compatible USB device formats
·

USB communication format: USB 2.0 HS (480 Mbps) and FS (12 Mbps)

·

File format: FAT16/32 (Windows)

·

Class: Mass storage class



MP3, WMA, AAC, WMV, AVI, MP4, M4V and JPG files written to a USB device with any format other than those listed above may not be played correctly, and their names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows:

·

Maximum directory hierarchy: 8 levels

·

Maximum number of folders in device: 3000 (including the root folder)

·

Maximum number of files in device: 9999

·

Maximum number of files per folder: 255



ii.

"iPod"

"iPhone", "iPod", "iPod classic", "iPod nano" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

The following "iPod", "iPod nano", "iPod classic", "iPod touch" and "iPhone" devices can be used with this system.

Made for:

·

"iPod touch" (5th generation)

·

"iPod touch" (4th generation)

·

"iPod touch" (3rd generation)

·

"iPod touch" (2nd generation)

·

"iPod touch" (1st generation)

·

"iPod classic"

·

"iPod with video"

·

"iPod nano" (7th generation)

·

"iPod nano" (6th generation)

·

"iPod nano" (5th generation)

·

"iPod nano" (4th generation)

·

"iPod nano" (3rd generation)

·

"iPod nano" (2nd generation)

·

"iPod nano" (1st generation)

·

"iPhone 5"

·

"iPhone 4S"

·

"iPhone 4"

·

"iPhone 3GS"

·

"iPhone 3G"

·

"iPhone"


HINT:

Depending on differences between models or software versions etc., some models might be incompatible with this system.





MP3/WMA/AAC OUTLINE


a.

Playable MP3 file standards

Compatible standard MPEG1 LAYER3, MPEG2 LSF LAYER3
Compatible sampling frequency
·

MPEG1 LAYER3: 32, 44.1, 48 (kHz)

·

MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)


Compatible bit rate
·

MPEG1 LAYER3: 32 to 320 (kbps)

·

MPEG2 LSF LAYER3: 8 to 160 (kbps)

·

Compatible with VBR


Compatible channel mode Stereo, joint stereo, dual channel, monaural


b.

Playable WMA file standards

Compatible standard WMA Ver. 7, 8, and 9
Compatible sampling frequency 32, 44.1, 48 (kHz)
Compatible bit rate (Only compatible with 2-channel playback)
·

Ver. 7, 8: CBR48 to 192 (kbps)

·

Ver. 9: CBR48 to 320 (kbps)

·

Compatible with VBR




c.

Playable AAC file standards

Compatible standard MPEG4/AAC-LC
Compatible sampling frequency 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate
·

16 to 320 (kbps)

·

Compatible with VBR




d.

ID3 tag, WMA tag and AAC tag

i.

Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.

HINT:

This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1.)



ii.

Additional text information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.


iii.

Additional text information called an AAC tag can be input to AAC files. Information such as song titles and artist names can be stored.



e.

Usable media

i.

Only CD-ROMs, CD-Rs (CD-Recordable) , CD-RWs (CD-ReWritable), DVD-ROMs, DVD-Rs (DVD-Recordable), DVD-RWs (DVD-ReWritable) and USB devices can be used to play MP3/WMA/AAC files.

NOTICE:
·

CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some discs may not be played.

·

If there are fingerprints or scratches on a disc, the disc may not be played or may skip.

·

Some CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) may deteriorate if they are left in the cabin for a long time.

·

Keep CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) in an opaque case.





f.

Usable media format

i.

Usable media format

Disc format CD-ROM Mode 1, CD-ROM XA Mode 2 Form 1, DVD-ROM
File format ISO9660 Level 1 and Level 2 (Joliet, Romeo)

HINT:
·

MP3/WMA/AAC files written in any unlisted format may not be played normally or the file names or folder names may not be displayed correctly.

·

This player is compatible with multi-session discs and can play CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) on which MP3/WMA/AAC files have been added. However, only the first session can be played.

·

Discs whose first session includes both music data and MP3, WMA and AAC format data may not be played.




ii.

Standards and restrictions

Maximum directory levels 8 levels
Maximum number of characters for a folder name/file name 64 characters
Maximum number of folders 192 (Including empty folders, root folders, and folders that do not contain MP3/WMA/AAC files)
Maximum number of files in a disc 255 (Including non-MP3/WMA/AAC files)



g.

File names

i.

Only files with an extension of ".mp3", ".wma" and ".m4a" can be recognized and played as MP3, WMA or AAC files.


ii.

Save MP3, WMA or AAC files with an extension of ".mp3", ".wma" or ".m4a".

NOTICE:

If non-MP3, non-WMA or non-AAC files are saved with an extension of ".mp3", ".wma" or ".m4a", those files may be wrongly recognized as MP3, WMA or AAC files and played. A loud noise may occur and damage to the speakers may result.





"Bluetooth" OUTLINE


E215384C11
2.406,0.865 2.594,1.031 0.188,0.167 10 false *b 3.583,1.896 3.771,2.063 0.188,0.167 10 false *c 4.573,1.917 4.76,2.083 0.188,0.167 10 false *1 5.563,1.896 5.75,2.063 0.188,0.167 10 false *d 4.021,1.385 4.208,1.552 0.188,0.167 10 false *e 5.125,1.385 5.313,1.552 0.188,0.167 10 false *e 0.073,0.052 0.26,0.219 0.188,0.167 10 false *a
*1 Navigation Receiver Assembly
(Built-in "Bluetooth" Antenna)
- -
*a Example *b Cellular Network
*c Cellular Phone
("Bluetooth" Compatible Type)
*d Portable Audio Player
("Bluetooth" Compatible Type)
*e "Bluetooth" Wireless Connection - -


a.

"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.


b.

"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.

HINT:

The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.



c.

Hands-free function

i.

The "Bluetooth" built-in navigation receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.

*: Some versions of "Bluetooth" compatible cellular phones may not function properly.



ii.

The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.


iii.

Compatible hands-free devices

Required "Bluetooth" specifications Ver. 1.1 or higher (Ver. 3.0+EDR or higher recommended)
Compatible profiles
·

HFP (Hands-Free Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended)*1

·

OPP (Object Push Profile) Ver. 1.1 or higher*1

·

PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Ver. 1.1 or higher recommended)*1

·

MAP (Message Access Profile) Ver. 1.0 or higher*2

·

SPP (Serial Port Profile) Ver. 1.1 or higher*3


Maximum number of hands-free devices that can be registered (including audio devices) 5

*1: This profile is necessary when using the hands-free function.

*2: This profile is necessary when using the message function (w/ Message Function).

*3: This profile is necessary when using the Toyota Link function (for RHD).


HINT:

The amount of remaining battery charge displayed on the navigation receiver assembly may be different from that of the "Bluetooth" device.




d.

"Bluetooth" audio function

i.

The "Bluetooth" built-in navigation receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the navigation receiver assembly.

*: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the navigation receiver assembly may be limited.



ii.

Compatible "Bluetooth" audio devices

Required "Bluetooth" specifications Ver. 2.0 or higher (Ver. 3.0+EDR or higher recommended)
Compatible profiles
·

A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)

·

AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.4 or higher recommended)


Maximum number of audio devices that can be registered (including hands-free devices) 5

HINT:

The amount of remaining battery charge displayed on the navigation receiver assembly may be different from that of the "Bluetooth" device.





TOYOTA LINK FUNCTION OUTLINE (for RHD)


a.

Toyota Link enables the usable content of a cellular phone to be displayed on and operated from the navigation receiver assembly screen. As "Bluetooth" communication is used for the communication between a cellular phone and the navigation receiver assembly, before using the Toyota Link function on the navigation system, the cellular phone needs to be registered to the navigation system as a "Bluetooth" device. For details regarding Toyota Link, applications and compatible phones, refer to http://www.toyota.com.au/owners.



RADIO DESCRIPTION


a.

Radio frequency band

i.

Radio broadcasts use the radio frequency bands shown in the table below.

E177192E08
0.677,0.25 1.469,0.458 0.792,0.208 10 Frequency 1.875,0.25 2.417,0.417 0.542,0.167 10 30 kHz 5.25,0.25 5.833,0.417 0.583,0.167 10 30 MHz 4.125,0.25 4.677,0.417 0.552,0.167 10 3 MHz 2.979,0.25 3.635,0.417 0.656,0.167 10 300 kHz 6.365,0.25 6.979,0.417 0.615,0.167 10 300 MHz 0.667,0.833 1.458,1.042 0.792,0.208 10 Designation 0.667,1.313 1.448,1.521 0.781,0.208 10 Radio wave 0.667,1.792 1.458,2 0.792,0.208 10 Modulation 2.583,0.833 2.813,1.01 0.229,0.177 10 LF 3.688,0.833 3.917,1.01 0.229,0.177 10 MF 4.854,0.833 5.083,1.01 0.229,0.177 10 HF 5.896,0.833 6.219,1.01 0.323,0.177 10 VHF 3.49,1.313 3.948,1.5 0.458,0.188 10 AM 5.75,1.313 5.979,1.49 0.229,0.177 10 FM 5.552,1.75 6.99,2 1.438,0.25 10 Frequency modulation 3.083,1.75 4.521,2.063 1.438,0.313 10 Amplitude modulation 0.344,2.292 1.594,2.5 1.25,0.208 10 LF: Low Frequency 5.26,2.292 6.979,2.5 1.719,0.208 10 VHF: Very High Frequency 3.74,2.292 5.063,2.5 1.323,0.208 10 HF: High Frequency 1.865,2.292 3.5,2.5 1.635,0.208 10 MF: Medium Frequency



b.

Service area

i.
E177193C06
0.938,2.073 1.104,2.229 0.167,0.156 10 *a 1.771,3.073 1.938,3.229 0.167,0.156 10 *c 1.354,2.563 1.521,2.719 0.167,0.156 10 *b
*a FM (Stereo)
*b FM (Monaural)
*c AM


The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.



c.

Radio reception problems

HINT:

In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.


i.
E177194C06
2.375,0.385 2.958,0.708 2.958,0.708 2.958,0.896 false 0.125,0.094 0.333,0.26 0.208,0.167 10 *a 2.896,0.938 3.104,1.104 0.208,0.167 10 *b
*a Phasing
*b Ionosphere


Phasing

AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.


ii.
E177195C06
0.103,0.084 0.298,0.237 0.194,0.153 10 *a
*a Multipath


Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.


iii.
E177196C05
0.112,0.045 0.282,0.229 0.17,0.184 10 *a
*a Fade Out


Fade out

Fade out is caused by objects (buildings, mountains and other large obstructions) that deflect part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to be deflected.



d.

Noise problem

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

Radio Frequency Noise Occurrence Condition Presumable Cause
AM Noise occurs in a specific area Foreign noise
Noise occurs when listening to an intermittent broadcast An identical program transmitted from multiple towers can cause noise where the signals overlap
Noise occurs only at night Signal phasing
FM Noise occurs while driving in a specific area Multipath resulting from a change in FM frequency



DAB (DIGITAL AUDIO BROADCAST) FUNCTION OUTLINE (for RHD)


a.

DAB (Digital Audio Broadcast) is the standard for digital radio. Compared to conventional FM/AM broadcasting, DAB enables higher sound quality radio broadcasting with lower noise when reception conditions change. DAB has an FM-Link function that automatically and temporarily changes the radio to the simultaneously broadcasted FM station if the DAB broadcasting reception level falls.



VEHICLE CUSTOMIZATION OUTLINE


a.

Customization of functions can also be customized on the multi-display screen. Refer to Owner's Manual for further information on customizable items for the navigation system.

HINT:
·

Items available for customization via the navigation system can also be customized by using the GTS.

·

Some customize parameters displayed on the GTS will be displayed on the vehicle customization screen for the navigation system. Users can customize these items.





AUTOMATIC SOUND LEVELIZER (ASL) FUNCTION OUTLINE


a.

The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases). The ASL adjusts the volume level based upon vehicle speed signals sent from the combination meter assembly.



COMMUNICATION SYSTEM


a.

AVC-LAN Outline (for 10 Speakers)

E226626E45
0.104,0.052 0.729,0.208 0.625,0.156 10 false Example: 3.292,1.406 3.917,1.573 0.625,0.167 10 false AVC-LAN 1.146,1.698 2.51,1.865 1.365,0.167 10 false (Resistor 60 to 80 Ω) 0.938,2.104 3.052,2.396 2.115,0.292 10 false Navigation Receiver Assembly 4.25,2.104 6.677,2.385 2.427,0.281 10 false Stereo Component Amplifier Assembly

i.

Components of the navigation system communicate with each other via AVC-LAN communication.


ii.

The AVC-LAN uses a twisted pair of wires for its communication lines.


iii.

The master unit of the AVC-LAN is the navigation receiver assembly.

HINT:
·

The navigation receiver assembly has the resistance (60 to 80 Ω) necessary for communication.

·

If a short or open occurs in the AVC-LAN circuit, communication is interrupted and the system will not operate normally.





b.

Local Bus Communication Outline (for 10 Speakers)

E215796E16
0.604,2.427 2.625,2.604 2.021,0.177 10 false : Local Bus Communication Line 1.479,1.677 3.51,1.927 2.031,0.25 10 false Navigation Receiver Assembly 4.073,1.677 6.115,1.875 2.042,0.198 10 false Combination Meter Assembly 0.104,0.052 0.698,0.229 0.594,0.177 10 false Example:

i.

Components of the navigation system communicate with each other via local bus communication.


ii.

The local bus uses a twisted pair of wires for its communication lines.


iii.

The master unit of the local bus is the navigation receiver assembly.

HINT:
·

The navigation receiver assembly has the resistance (108 to 132 Ω) necessary for communication.

·

The combination meter assembly has the resistance (108 to 132 Ω) necessary for communication.

·

If a short or open occurs in the local bus circuit, communication is interrupted and the system will not operate normally.





c.

CAN Communication Outline

i.

The navigation system uses CAN communication between the navigation receiver assembly and ECUs.




DIAGNOSTIC FUNCTION OUTLINE


a.

The navigation system has a diagnostic function (the result is indicated on the master unit).