Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2015.04
RM2030EQ _56 Audio / Visual / Telematics _014659 NAVIGATION / MULTI INFO DISPLAY _0074553 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the navigation receiver assembly via this circuit.

The sound signal that has been sent is amplified by the navigation receiver assembly and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the navigation receiver assembly or speakers.

WIRING DIAGRAM

E277819E42
0.844,0.635 1.458,0.833 0.615,0.198 10 false AUXO 0.948,1.833 1.563,2.031 0.615,0.198 10 false ALO 0.833,2.417 1.448,2.615 0.615,0.198 10 false ASGN 0.844,3.01 1.458,3.208 0.615,0.198 10 false AGND 0.927,1.24 1.542,1.438 0.615,0.198 10 false ARO 1.313,0.521 1.927,0.719 0.615,0.198 10 false 9 1.333,1.104 1.948,1.302 0.615,0.198 10 false 6 1.333,1.688 1.948,1.885 0.615,0.198 10 false 7 1.344,2.281 1.958,2.479 0.615,0.198 10 false 8 1.313,2.885 1.927,3.083 0.615,0.198 10 false 10 3.271,2.813 3.948,3.01 0.677,0.198 10 false (Shielded) 5.948,0.635 6.563,0.833 0.615,0.198 10 false ADPG 5.958,1.229 6.573,1.427 0.615,0.198 10 false VAR+ 5.958,1.813 6.573,2.01 0.615,0.198 10 false VAL+ 5.958,2.417 6.573,2.615 0.615,0.198 10 false VA- 5.958,3.01 6.573,3.208 0.615,0.198 10 false AGND 5.708,0.531 6.323,0.729 0.615,0.198 10 false 25 5.708,1.115 6.323,1.313 0.615,0.198 10 false 26 5.719,1.708 6.333,1.906 0.615,0.198 10 false 28 5.719,2.313 6.333,2.51 0.615,0.198 10 false 27 5.708,2.896 6.323,3.094 0.615,0.198 10 false 11 0.406,3.646 1.573,4.25 1.167,0.604 10 false No. 1 Stereo Jack Adapter Assembly 5.688,3.438 6.302,3.635 0.615,0.198 10 false I67 5.688,3.604 6.896,4.146 1.208,0.542 10 false Navigation Receiver Assembly 0.406,3.458 1.021,3.656 0.615,0.198 10 false I146

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the I67 navigation receiver assembly connector.


b.

Disconnect the I146 No. 1 stereo jack adapter assembly connector.


c.
E227392C24
1.563,0.365 1.885,0.594 0.323,0.229 1.573,2.375 1.896,2.604 0.323,0.229 2.104,1.469 2.656,0.948 false 2.208,1.604 2.063,1.927 false 2.104,1.604 1.573,1.99 false 2.438,1.604 2.958,1.927 false 2.323,1.604 2.469,1.927 false 1.573,3.833 1.167,4.188 false 1.854,3.823 2.25,4.177 false 2,3.813 2.26,3.646 false 1.417,3.823 1.063,3.583 false 1.708,3.823 1.563,4.177 false 2.708,0.823 3.135,0.969 0.427,0.146 10 false AGND 1.76,1.948 2.271,2.333 0.51,0.385 10 false VAR+ 1.188,2 1.75,2.281 0.563,0.281 10 false ADPG 2.927,1.958 3.292,2.104 0.365,0.146 10 false VAL+ 2.438,1.958 2.688,2.104 0.25,0.146 10 false VA- 0.177,0.167 0.604,0.771 0.427,0.604 10 false *a 1.604,0.396 2.073,0.646 0.469,0.25 10 false I67 2.302,3.5 2.729,3.646 0.427,0.146 10 false AGND 0.865,4.177 1.25,4.385 0.385,0.208 10 false ALO 2.177,4.198 2.635,4.375 0.458,0.177 10 false AUXO 0.177,2.229 0.563,2.542 0.385,0.313 10 false *b 0.719,3.427 1.125,3.615 0.406,0.188 10 false ARO 1.354,4.198 1.781,4.344 0.427,0.146 10 false ASGN 1.615,2.406 2.115,2.667 0.5,0.26 10 false I146
*a Front view of wire harness connector
(to Navigation Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I67-25 (ADPG) - I146-9 (AUXO) Always Below 1 Ω
I67-11 (AGND) - I146-10 (AGND) Always Below 1 Ω
I67-26 (VAR+) - I146-6 (ARO) Always Below 1 Ω
I67-28 (VAL+) - I146-7 (ALO) Always Below 1 Ω
I67-27 (VA-) - I146-8 (ASGN) Always Below 1 Ω
I67-25 (ADPG) - Body ground Always 10 kΩ or higher
I67-11 (AGND) - Body ground Always 10 kΩ or higher
I67-26 (VAR+) - Body ground Always 10 kΩ or higher
I67-28 (VAL+) - Body ground Always 10 kΩ or higher
I67-27 (VA-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR