Home › Steering › STEERING COLUMN › STEERING PAD SWITCH(for 4 Spoke) › from 2015.04
RM2030EQ _55 Steering _014656 STEERING COLUMN _0074534 STEERING PAD SWITCH(for 4 Spoke) G

STEERING COLUMN  STEERING PAD SWITCH(for 4 Spoke)  INSPECTION  


PROCEDURE

Hide 84250A 1.INSPECT STEERING PAD SWITCH ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

for: w/ Multi-display
E314619C01
2.115,0.344 2.5,0.552 0.385,0.208 4.135,0.26 4.521,0.469 0.385,0.208 1.521,3.531 1.771,3.01 false 1.333,2.167 1.698,2.25 false 1.979,2.167 1.833,1.719 false 1.854,3.635 2.26,3.094 false 1.26,2.771 1.698,2.604 false 2.854,2.979 1.938,2.813 false 1.958,2.594 1.063,3.531 false 1.948,2.396 2.313,1.802 false 2.146,2.615 2.74,2.396 false 5.198,2.177 5.521,1.656 false 5.49,2.24 5.906,1.854 false 5.813,3.469 5.406,3.01 false 5.344,3.604 5.229,2.802 false 4.448,2.458 5.031,2.583 false 4.198,2.24 5.208,2.406 false 4.188,3 5.229,2.594 false 5.438,2.635 5.927,2.625 false 3.771,0.469 4.083,0.844 false 4.208,0.833 3.938,0.24 false 4.323,0.833 4.792,0.292 false 5.115,0.635 4.49,0.958 false 4.958,1.344 4.417,0.958 false 4.5,1.406 4.323,0.958 false 4.167,1.458 4.198,0.948 false 1.854,0.604 2.219,0.688 false 0.177,0.156 0.49,0.313 0.313,0.156 10 false *a 1.188,2.083 1.5,2.24 0.313,0.156 10 false *b 1.406,3.531 1.719,3.688 0.313,0.156 10 false *c 1.729,1.51 2.042,1.667 0.313,0.156 10 false *d 1.781,3.667 2.094,3.823 0.313,0.156 10 false *e 2.302,1.625 2.615,1.781 0.313,0.156 10 false *f 2.927,2.917 3.208,3.24 0.281,0.323 10 false *g 1.094,2.708 1.406,2.865 0.313,0.156 10 false *h 2.844,2.302 3.156,2.458 0.313,0.156 10 false *i 0.917,3.563 1.167,3.813 0.25,0.25 10 false *j 6.01,1.74 6.323,1.896 0.313,0.156 10 false *k 5.917,3.417 6.229,3.573 0.313,0.156 10 false *l 5.333,3.646 5.646,3.802 0.313,0.156 10 false *n 4.25,2.354 4.563,2.51 0.313,0.156 10 false *o 4.021,2.927 4.333,3.083 0.313,0.156 10 false *p 6.01,2.563 6.323,2.719 0.313,0.156 10 false *q 5.521,1.479 5.833,1.635 0.313,0.156 10 false *r*A 3.958,2.115 4.271,2.271 0.313,0.156 10 false *m 3.979,1.51 4.438,1.708 0.458,0.198 10 false EAU 4.417,1.458 4.875,1.656 0.458,0.198 10 false AU3 4.938,1.406 5.396,1.604 0.458,0.198 10 false AU2 5.208,0.521 5.667,0.719 0.458,0.198 10 false AU1 4.854,0.125 5.313,0.323 0.458,0.198 10 false +DP2 3.75,0.052 4.208,0.25 0.458,0.198 10 false +DP 3.521,0.375 3.979,0.573 0.458,0.198 10 false HO 4.24,0.292 4.698,0.49 0.458,0.198 10 false z3 2.24,0.375 2.698,0.573 0.458,0.198 10 false A 1.635,0.521 2.094,0.719 0.458,0.198 10 false HO
*A w/ Voice Switch - -
*a Component without harness connected
(Steering Pad Switch Assembly)
*b Volume+
*c Volume- *d Back (LH)
*e MODE/HOLD *f Up (LH)
*g Down (LH) *h Left
*i Right *j Enter (LH)
*k Off hook *l On hook
*m Up (RH) *n Down (RH)
*o Back (RH) *p Enter (RH)
*q Page *r Voice


Standard Resistance:
Tester Connection Condition Specified Condition
z3-1 (HO) - A-1(HO) Always Below 2.5 Ω
z3-11 (AU1) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Up (LH) switch pushed Below 2.5 Ω
Down (LH) switch pushed 313 to 345 Ω
Volume+ switch pushed 950 to 1050 Ω
Volume- switch pushed 2955 to 3265 Ω
z3-10 (AU2) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
MODE/HOLD switch pushed Below 2.5 Ω
On hook switch pushed 313 to 345 Ω
Off hook switch pushed 950 to 1050 Ω
Voice switch pushed* 2955 to 3265 Ω
z3-9 (AU3) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Enter (LH) switch pushed Below 2.5 Ω
Back (LH) switch pushed 313 to 345 Ω
Right switch pushed 950 to 1050 Ω
Left switch pushed 2955 to 3265 Ω
z3-3 (+DP2) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Back (RH) switch pushed Below 2.5 Ω
Up (RH) switch pushed 313 to 345 Ω
Down (RH) switch pushed 950 to 1050 Ω
Page switch pushed 2955 to 3265 Ω
z3-2 (+DP) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Enter (RH) switch pushed Below 2.5 Ω

*: w/ Voice Switch


HINT:

If the result is not as specified, replace the steering pad switch assembly.



b.

Check the illumination.

E314620C01
3.854,0.323 4.5,0.844 false 4.063,1.521 4.198,0.938 false 0.26,0.281 0.573,0.438 0.313,0.156 10 false *a 3.958,1.573 4.271,1.729 0.313,0.156 10 false EAU 3.563,0.208 3.875,0.365 0.313,0.156 10 false IL+2
*a Component without harness connected
(Steering Pad Switch Assembly)
- -


i.

Connect a positive (+) lead from the battery to terminal 5 (IL+2) and a negative (-) lead to terminal 8 (EAU) of the steering pad switch assembly connector.


ii.

Check that the switch illumination illuminates.

OK:

The steering pad switch illumination illuminates.


HINT:

If the result is not as specified, replace the steering pad switch assembly.




c.

Measure the resistance according to the value(s) in the table below.

for: w/o Multi-display
E314621C01
2.115,0.354 2.458,0.573 0.344,0.219 4.167,0.24 4.51,0.458 0.344,0.219 3.76,0.542 4.208,0.844 false 3.135,0.906 4.094,0.844 false 4.323,1.375 4.229,0.958 false 4.708,1.344 4.406,0.969 false 5.177,1.313 4.521,0.969 false 1.563,1.906 1.938,2.417 false 1.365,3.219 1.906,2.813 false 1.156,2.594 1.729,2.594 false 2.125,2.604 2.677,2.354 false 2.25,3.052 1.875,3.51 false 5.417,3.021 5.938,3.479 false 5.469,2.25 5.958,2.031 false 5.458,2.604 5.979,2.656 false 5.25,2.813 5.906,3.021 false 5.146,1.75 5.219,2.375 false 4.198,3.021 5.063,2.604 false 4.469,2.292 5.219,2.604 false 1.635,0.708 2.219,0.677 false 3.917,0.344 4.292,0.833 false 0.094,0.104 0.406,0.26 0.313,0.156 10 false *a 1.458,1.708 1.771,1.865 0.313,0.156 10 false *b 1.208,3.198 1.521,3.354 0.313,0.156 10 false *c 4.031,3 4.344,3.156 0.313,0.156 10 false *d 1.781,3.49 2.094,3.646 0.313,0.156 10 false *e 2.708,2.25 3.021,2.406 0.313,0.156 10 false *f 1,2.49 1.281,2.719 0.281,0.229 10 false *g 5.063,1.542 5.375,1.698 0.313,0.156 10 false *h 5.958,3.01 6.271,3.167 0.313,0.156 10 false *i 4.333,2.177 4.552,2.417 0.219,0.24 10 false *j 6.021,1.948 6.333,2.104 0.313,0.156 10 false *k 5.99,3.448 6.302,3.604 0.313,0.156 10 false *l 6.01,2.583 6.323,2.74 0.313,0.156 10 false *m 5.25,1.313 5.75,1.583 0.5,0.271 10 false AU1 4.625,1.385 5.125,1.656 0.5,0.271 10 false AU2 4.198,1.427 4.698,1.698 0.5,0.271 10 false EAU 2.885,0.844 3.385,1.115 0.5,0.271 10 false HO 3.563,0.177 4.063,0.448 0.5,0.271 10 false +DP2 4.25,0.271 4.75,0.542 0.5,0.271 10 false z3 2.229,0.385 2.729,0.656 0.5,0.271 10 false A 1.396,0.635 1.896,0.906 0.5,0.271 10 false HO 3.479,0.448 3.979,0.719 0.5,0.271 10 false +DP
*a Component without harness connected
(Steering Pad Switch Assembly)
*b Volume+
*c Volume- *d Back
*e MODE/HOLD *f Seek+
*g Seek- *h Up
*i Down *j Enter
*k Off hook *l On hook
*m Page - -


Standard Resistance:
Tester Connection Condition Specified Condition
z3-1 (HO) - A-1(HO) Always Below 2.5 Ω
z3-11 (AU1) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Seek+ switch pushed Below 2.5 Ω
Seek- switch pushed 313 to 345 Ω
Volume+ switch pushed 950 to 1050 Ω
Volume- switch pushed 2955 to 3265 Ω
z3-10 (AU2) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
MODE/HOLD switch pushed Below 2.5 Ω
On hook switch pushed 313 to 345 Ω
Off hook switch pushed 950 to 1050 Ω
z3-3 (+DP2) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Back switch pushed Below 2.5 Ω
Up switch pushed 313 to 345 Ω
Down switch pushed 950 to 1050 Ω
Page switch pushed 2955 to 3265 Ω
z3-2 (+DP) - z3-8 (EAU) No switch pushed 95 to 105 kΩ
Enter switch pushed Below 2.5 Ω


HINT:

If the result is not as specified, replace the steering pad switch assembly.



d.

Check the illumination.

E314622C01
4.083,1.604 4.208,0.938 false 4.042,0.271 4.49,0.833 false 0.177,0.156 0.49,0.354 0.313,0.198 10 false *a 3.917,1.646 4.354,1.885 0.438,0.24 10 false EAU 3.729,0.167 4.188,0.406 0.458,0.24 10 false IL+2
*a Component without harness connected
(Steering Pad Switch Assembly)
- -


i.

Connect a positive (+) lead from the battery to terminal 5 (IL+2) and a negative (-) lead to terminal 8 (EAU) of the steering pad switch assembly connector.


ii.

Check that the switch illumination illuminates.

OK:

The steering pad switch illumination illuminates.


HINT:

If the result is not as specified, replace the steering pad switch assembly.